1jz vvti into ps13 question :help

[adam 9]

So I'm fitting a 1jz vvti to my ps13 at the minute .

Ive done lots of reading on the interweb and the yanks can be helpful boyos . No a lot of information is generally on non vvti engines and ecus .

My my engine is a jzx100 lump and loom

I'm fairly certain I have the f4 plug and jzx body plug sorted for the dash signals to clocks etc but if anyone would like to help there I would be happy .

Now heres rea the real stuff

do I just have to power up the ecu itself or do I need to send lots of individual powers to everything that would have been plugged into the fuse box ?

And i I have the alternator and starter sorted too .

I I just want it to start and run fine so that's where I need help ..

[niall s14a]

Paul Twomey is the man to ask. Seems to know them inside out

[adam 9]

Thanks Niall . I shall give him a shout ��

[looneydrift]

I put a vvti 1jz out of a jzx100 into my s14 u have to power the ecu and all the engine sensors, and coils, and injectors ya can get the dash plugs from driftmotion they have loads of bits for the conversion