2013 IDC Rules & Regulations

[Cooldrft]

2013 IDC Rules & Regulations, Are now available for download.
http://www.archweb.ie/kieran/IDC-regs-2013.html

Facebook page ,Like and share
http://www.facebook.com/pages/Irish-...ref=ts&fref=ts

[barman]

good to see wont be entering idc this year but now i know at least what is needed for idc and i can start preping the car lol
what monies allow lol

[Quealy]

Hope they don't go too mad with the roll cage rules, says main hoop needs to be 45x2.5, id say more than half the cars in Ireland have the full cage made of 43mil OD pipe cus its all that's available in local hardwares.

[aka pete]

any dates/venues yet apart from mondello in april?

[S14a johno]

in the terms of fixed seat, is that include a slideing rails ?

[DaveM-sport]

Hope they don't go too mad with the roll cage rules, says main hoop needs to be 45x2.5, id say more than half the cars in Ireland have the full cage made of 43mil OD pipe cus its all that's available in local hardwares.

Get some 44.6mm stuff and a good coat of primer and paint and it'll be mint

Front legs that bend around the dash (dash dodgers) are not permitted.

Looks like there's going to be more drama if dash-dodgers are permitted again?

All main hoops regardless of material should be constructed from 45x2.5mm or 50x2mm tube minimum.A-pillar bars, door bars, rear stay bars and all additional diagonal and brace bars must be constructed of 38x2.5mm or 42x2mm.

I'm guessing it should have "at least" for the measurements of the main hoop and all other bar sizes?



Nice to see the rules out reasonably early anyway

[JStone]

Hope they don't go too mad with the roll cage rules, says main hoop needs to be 45x2.5, id say more than half the cars in Ireland have the full cage made of 43mil OD pipe cus its all that's available in local hardwares.

It also says the material must be seamless CDS or T45, all DIY rollcages will need proof of purchase for cage tubing to be logged.

[JStone]

I'm guessing it should have "at least" for the measurements of the main hoop and all other bar sizes?



Nice to see the rules out reasonably early anyway

Using tube that exceeds minimum specs is not a problem.

[Chuck_g]

It also says the material must be seamless CDS or T45, all DIY rollcages will need proof of purchase for cage tubing to be logged.

Mine is in the car since day one, receipts long gone in the bin if they ever even got one?? Has also passed 3 years scrutiny..........is this acceptable?

[alan180sx]

My cage also in my car wit few years no receipts or anything for the piping in it

Passed prodrift scrutiny this year...

If I got go changing my cage I won't b takin part in IDC