wexican motorsport sr20 altezza

[Martin ffrench]

Breaks my heart to do this but sense must prevail.

Spec as follows


1999 Toyota Altezza RS200
Wexican Motorsport Arches - made by CarbonFusion.eu
Wexican Motorsport Rear Diffuser - made by CarbonFusion.eu
Standard Rear Altezza Bumper with Lip
Vertex front bumper modified to Wexican Motorsport specification
Hippo Sleek sideskirts modified to Wexican Motorsport specification
Hippo Sleek rear spoiler lip
Wexican Motorsport carbon fibre front door skins - made by CarbonFusion.eu
Wexican Motorsport boot skin - made by CarbonFusion.eu
Origin GT Wing
Wexican Motorsport canards - made by CarbonFusion.eu
Wexican Motorsport tubs - made by CarbonFusion.eu
Universal carbon fibre mirrors
Lexan Marguard windows - made by Plastics4Performance
Late Japanese spec rear lights
Work CR Kai front wheels in 17x9 ET-5
Rota Torque rear wheels in 18x9.5 ET-5
Toyo T1R 225/45/17
Toyota Supra front brakes with Project Mu brake pads
Standard rear brakes with Project Mu pads
Braided brake lines
Wexican Motorsport rear adjustable lower wishbones
Wexican Motorsport rear adjustable traction arms
Wexican Motorsport rear adjustable toe arms
Wexican Motorsport rear modified top wishbones
4.1 final drive with Cusco 2-way LSD
Wexican Motorsport front lower wishbones
Wexican Motorsport inner and outer tie rods
Wexican Motorsport modified front hubs
Wexican Motorsport front tension rods and brackets
Wexican Motorsport front roll centre adjusters
Cusco top front camber arms
Wexican Motorsport modified front subframe
HSD Coilovers supplied by Driftworks
Cusco anti-roll bars (front & rear)
Cusco under-body bracing (front&rear)
Standard fuel tank with uprated Altezza fuel pump feeding swirlpot and Wexican Motorsport fuel return.
Five litre swirl pot in boot
Bosch 044 fuel pump in swirl pot
Braided fuel lines
FSE Bullet fuel filter
SR20-DET
Greddy TD06-20G turbo
87mm Greddy pistons
Uprated rods
Unknown camshafts
Greddy fuel pressure regulator
1.2mm steel head gasket
850cc injectors
Uprated throttle body
OS Giken twin plate clutch
RB25 gearbox
Wexican Motorsport one piece steel propshaft
Wexican Motorsport wiring loom
Cusco bolt-in rollcage
Race Technology digital dash display
Greddy gauges (oil temperature, oil pressure, boost, water temperature, fuel pressure, exhaust temperature) and controller
Greddy boost controller
Sparco steering wheel
Sparco harnesses
Thrash Racing seats
Upright hydraulic handbrake
Factory heaters
Custom switch panel and light controls.

Car is mappeed by greg at protuner in the uk and made 400bhp and 425ft lbs
at the fly.
It is mapped for wrf race fuel.
It comes with 4 rear rims.

Price is 15,000 euro ready to rock drive up on the trailer/truck it has been tested and works.















Any questions or inquiries welcome to
085 7809132 or ffrenchm@gmail.com

[Prodrifter86]

Lad sorry for the spam. but wtf???? dont do it...

[Eoin R.]

jesus id love that fuckin thing!!!

[paddymcgrath]

You're going to regret this ...

[paulr5]

I had to look at the calender there to see if it was April 1st? :O
GLWS......

[hunty_sideways]

Very hard not to spam but WTF are ya not competing in it this year ?

Anybody who has seen this car knows that it is a prodrift winning car with the right pilot Glws anyway lad

[Famous jh]

This actually upsets me. Would love to see you get the backing you deserve to actually compete a full season..You would kick arse, one of the only proper aggressive drivers in the country..

[Dennis Healy]

This actually upsets me. Would love to see you get the backing you deserve to actually compete a full season..You would kick arse, one of the only proper aggressive drivers in the country..

100% agree.

[skinny d]

This actually upsets me. Would love to see you get the backing you deserve to actually compete a full season..You would kick arse, one of the only proper aggressive drivers in the country..

+2 - I totally agree.

[AL.H]

hopefully someone in Ireland buys it and it stays