View Full Version : Drifty 180sx!!!!
Rite guys after alot of talkin an putin it off, the brother an a few my mates gave me a push in the rite direction. goin turnin my baby into a comp drift car.
goin to do the basics an change parts as i go along an hopefully improve.
ere wats done to her at the min
Engine:
Sr20DET Redtop
Aftermarket Cams
Rocker Stoppers
HKS Metal Head Gasket
HKS Super Dragger Exhaust System
HKS Decat
Big Front Mount Intercooler
Acl Main Bearings
Acl Rod Bearings
Acl Trust Washers
Engine Torque Damper
Dump Valve
Z32 Airflow Meter (thanks Bart)
APexi Power FC (thanks Bart)
Strut Brace Front and Back
Transmission And Suspension:
Standard SR Box
Short Shifter
KAZZ 2 Way
Tein Tie Rods
Ksport Coilovers and Camber Mounts
Interior:
Bucket Seat
Deep Dish Steering Wheel
Huge Rev Counter
Greedy Oil Temp Gauge
Greedy Boost Gauge
Greedy Exhaust Temp Gauge
Defi Style Oil Pressure Gauge
HKS Turbo Timer
Drift Button
Razo Gear Knob
Razo Pedals
Luke Harness
Exterior:
Tenzo R DC6 Alloys 17"
Ultralite Wheel Spacers
Vertex Back Bumper
Vertex Sideskirts
Kouki Spoiler(thanks Bart)
Fibre Glass Vented Wings
Kouki Tinted Back Lights
here wat it looks like before
http://i42.tinypic.com/2czwltd.jpg
here wat it looks like now
http://i30.tinypic.com/v6t2yb.jpg
striped it out today an painted her up inside
here pics of her stripped out wen at it today
decided to leave in the doorcards and carpet
http://i40.tinypic.com/a1n1w2.jpg
http://i42.tinypic.com/15cblz7.jpg
http://i40.tinypic.com/1z2zj37.jpg
http://i42.tinypic.com/10ncmxz.jpg
il post up as i go along
noice:D
wat hp is she puttin out and is it pd ur doin?
noice:D
wat hp is she puttin out and is it pd ur doin?
unsure of horsepower mate am waiting on a remap sum da lads on ere reckon ova 300 mark anyways goin by wat i ave in it
Theres no point stripping it out unless you take out all the sound deadining, which you havnt done ;) the rear seats and trim weigh sweet f all!
Theres no point stripping it out unless you take out all the sound deadining, which you havnt done ;) the rear seats and trim weigh sweet f all!
you always on the ball pete, ya wen bk at it earlier broke my balls takin out the sound deadening shit hammerin away at it with the scraper hahaha
all out now :p
Aidan Hogan
19-04-10, 17:55
Theres no point stripping it out unless you take out all the sound deadining, which you havnt done ;) the rear seats and trim weigh sweet f all!
What he said exactly :cool:
good man i plan to do the same in the coming months
Finally got around to updating my thread
Here my Progress
Stripped the car out fully to get ready for the weld in cage an resprayed the inside the car in black
http://i31.tinypic.com/3adr8.jpg
http://i29.tinypic.com/20kehso.jpg
Robbie Daly Ps13
16-07-10, 17:24
Why did you spray the car before you did the cage because parts of it will have to be brought back to care metal for welding........! And its gonna be a bitch taping up the whole car instead of jus the cage....!
Cage Welded In An Painted Takata Green
Also Fitted The Dash Gauges etc ....................
http://i26.tinypic.com/2ci8sr8.jpg
http://i26.tinypic.com/wwmept.jpg
http://i29.tinypic.com/2hn3nsl.jpg
Just A Random Pic Of My Son He Says Its His Car:D:D:D
http://i27.tinypic.com/2dvq72q.jpg
Got My Mani, Japspeed Elbow And Downpipe Fitted
Thanks To Bart At JustJap For The Parts
http://i27.tinypic.com/33y16bl.jpg
Pic Of Rotas And Kouki Spoiler Fitted
http://i30.tinypic.com/2u4prhw.jpg
And OF Course My Driftireland Stickers:cool::cool::cool:
http://i32.tinypic.com/9sw7yu.jpg
Why did you spray the car before you did the cage because parts of it will have to be brought back to care metal for welding........! And its gonna be a bitch taping up the whole car instead of jus the cage....!
Was orignally jus goin ave a half bolt in cage robbie but a changes in plans;)
Nice job done on the cage Alan ;)
Nice job done on the cage Alan ;)
Cheers John am happy enuf with it, you can pass proper judgement wen ya doin the hydro;)
Made up a set of towing eyes am painted em up takata green to
Car is off down to Famous jh in the coming weeks to get hydro an few bits done
Administrator
17-07-10, 16:38
Good work man, she's coming along sweet! The driftireland 900mm stickers looking pretty sweet if I do say so myself! Keep up the work
comin along nicely man!
Cheers lad
Good work man, she's coming along sweet! The driftireland 900mm stickers looking pretty sweet if I do say so myself! Keep up the work
thanks darragh. would love to get da 900mm stickers in green for da skirts
BoyRacer_X
17-07-10, 17:46
Its coming along nicely lad!
When will it be ready for the tracks? :D
Its coming along nicely lad!
When will it be ready for the tracks? :D
thanks for da comments
Hope to take it out for a run at da driftjam event in fermoy august 1st al goin wel
after a bit of thinkin i decided to leave the power as it is instead goin to get to used to the car as it is. ill get the hydro an extra lock sorted in next few weeks the il go bout upgrading all my suspension arms an dat.
serious tom
18-07-10, 17:45
Sounds like a plan..
After listening to what peoples opinions are I've accepted that its best to work with what you have, and then upgrade what you notice to be lacking..
I've always had this pre conception in my head that if it doesnt have adjustable arms it isn't really good etc etc,
but the way i see it is its all extra, the car will still be good without them, so you may aswell work away and upgrade them as you get used to the car, as not only will it make the car better, but you will be able to understand how each set of arms changed the cars feel. and then you will know for future what a car needs.
Sounds like a plan..
After listening to what peoples opinions are I've accepted that its best to work with what you have, and then upgrade what you notice to be lacking..
I've always had this pre conception in my head that if it doesnt have adjustable arms it isn't really good etc etc,
but the way i see it is its all extra, the car will still be good without them, so you may aswell work away and upgrade them as you get used to the car, as not only will it make the car better, but you will be able to understand how each set of arms changed the cars feel. and then you will know for future what a car needs.
To True lad wel spoken. i always taught i needed the best of everything done to the car before it would be ready to drift but she drift away fine now so step by step is the best way to do i. as you grow the car wil need to but all in time
serious tom
18-07-10, 17:58
To True lad wel spoken. i always taught i needed the best of everything done to the car before it would be ready to drift but she drift away fine now so step by step is the best way to do i. as you grow the car wil need to but all in time
And if people can drift BMW's and volvo's etc with their idea of a standard subframe, i think nissans are miles ahead from the off :p
Yea, and at least then you will be able to tell the diference once you change them.
And if people can drift BMW's and volvo's etc with their idea of a standard subframe, i think nissans are miles ahead from the off :p
Yea, and at least then you will be able to tell the diference once you change them.
ya lad it all bout track time an practice not wat ya got done to the car
serious tom
18-07-10, 18:38
True dat! seat time x1000000
Said id post these in ere to
Wen i got my Rotas they were touchin my rear arches like crazy,
they are 17x9 et30 on the front and 17x9.5 et30 on the back
had a set of 25mm spacers already on the car so opted to leave
em on the car. was goin to get rear overfenders but much rather
the flared arch luk.
So got onto the Famous jh who called an sorted my arch problem
no paint or body damage flawless work as always by john
Rear Arches Rolled And Flared:
http://i32.tinypic.com/2ns1h84.jpg
http://i29.tinypic.com/2ut2mx4.jpg
As you can tell it a flawless job:cool::cool::cool::cool:
http://i28.tinypic.com/2wg86lk.jpg
nice car man..fair play:)
nice car man..fair play:)
thanks mate..............
just a bit of an update
Droped the car down to famous jh last week he goin doin my extra lock and also fitting my hydraulic handbrake which i picked up dis week off bart at justjap (big big thanks)
il keep ye posted on wats happening:cool:
bit of update guys.
finally and i mean finally got my car running perfect,
the car is cuming along nicely. it in the care of famous jh.
wen i put the new engine in a few months bk it wasnt running the best bit of
a misfire.
so john had a gud luk at it and a set of new plugs an new uprated fuel pump finally got to feel wat the car was realy liie an i must admitt i was grining from ear to ear.
hyrdo bein done at the min then the extra lock be sorted
got Driftworks inlet and outlet hydro lines
For the extra lock i got a set of adjustable tension rods from Jay
and got a set of rack offset spacers from Driftworks. quealy goin modifing my hubs
wil take a few pics wen i get the chance
it bein a long time since i updated this and alot has happened
since like sr shittin itself an dat so big update needed........
First off a HUGE thanks to TEAM MANFOOT And GARAGE WANG
Starting with my steering.....
S14 Wishbones an new balljoints
Manfoot Modified Hubs
Driftworks Rack Spacers
Manfoot Modified Adjustable Tension Rods
Manfoot Modified Inner Tie Rods
Manfoot Lock Stops
End Result is unreal Famousjh and Nick Quealy did an amazin job
Hydro Up Next.........
Compbrake Hydro
Driftworks Hydro Lines
Manfoot Hydro Handle
Yellow Stuff Pads
Engine...........
Had to get new engine for time bein old sr wil be rebuilt
by Garage Wang for next year pd
Garage Wang And Nick Quealy stripped down my new engine
and sorted everythin out so it like new an ready for remap
Then onto TDP an got car mapped up and runnin so gud
Car hittin goldstone next weekend for first day out.
Team Manfoot (famousjh and quealy)
Garage Wang (driftma)
Big Thanks Dis Drift Car Was Made Possible Cause Of Ye
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.