PDA

View Full Version : What engine???


Steo84
22-02-10, 09:44
Have a mint 180sx body there and a choice of a few different engines.
In your opinion whats the best engine from this list.

1. nissan 300zx twinturbo
2. mk4 supra 2JZ-GTE
3. mitsubishi 3.5 v6
4. mitsubishi GTO 3.0 twin turbo
5. rx7 rotary turbo (fd)
6. levin 1.6 20valve on trottle bodys

Some are small light engines but might be underpowerd for drifting and the rest are big heavy powerful bastards.
Greg
22-02-10, 10:04
From that list it has to be the 2jz.
way2fastforu
22-02-10, 10:12
2jz all day long!!!!!!
Stevo
22-02-10, 10:13
As above jz :D
yowdy
22-02-10, 10:22
jz defo,,compred to all above it has a low compression bottom end, metal head gasket,and bottom end is good for 550bhp +,, have one here in the shead ready to drop into an altezza:D and a 1jz beside it ready to drp into my ps13:D
Stevo
22-02-10, 10:29
jz defo,,compred to all above it has a low compression bottom end, metal head gasket,and bottom end is good for 550bhp +,, have one here in the shead ready to drop into an altezza:D and a 1jz beside it ready to drp into my ps13:D

The shed of jz powwwaz :cool::D
way2fastforu
22-02-10, 10:31
and a 1jz beside it ready to drp into my ps13:D

wana drop that 1jz into my ps13 instead:D
andy t
22-02-10, 12:33
jz all da wayyyyy
carpo
22-02-10, 12:40
have four 1jz's in stock

3 x 1jz jzx100 single turbo vvti engines complete
1 x 1jz jzx90 twin turbo engine complete

and il throw in set of engine mounts to drop one of the engines straight into
the 180sx:)
s13-ste
22-02-10, 12:41
be brave and different and go with the rotary!

and as for the z32 engine done even think about it, they are meant to be a pig to work on
yowdy
22-02-10, 12:41
wana drop that 1jz into my ps13 instead:D

i sure can if the price is right:D
SUPER 180
22-02-10, 14:19
have four 1jz's in stock

3 x 1jz jzx100 single turbo vvti engines complete
1 x 1jz jzx90 twin turbo engine complete

and il throw in set of engine mounts to drop one of the engines straight into
the 180sx:)

Wats the best price ya can do on one of these engines for??
grimix180
22-02-10, 21:10
jzs are common rotary all the way
mms motorsport
22-02-10, 21:22
put jz in an your finished..ive got a r154 full gearbox conversion to fit s14 if interested
1jsoarer
22-02-10, 21:38
jz are the job!.... But rotary are kinda rare! Go with the 20b!
GERRYSX
22-02-10, 21:44
jz:cool: cant beat that sound
MCNSPORT.com
22-02-10, 21:57
1. nissan 300zx twinturbo
No too troublesome and one of the only engines in the world that you can empty a bag of marbles over and not 1 will hit the ground

2. mk4 supra 2JZ-GTE
id go for this, easiest to fit, reliable and good power

3. mitsubishi 3.5 v6
no shite

4. mitsubishi GTO 3.0 twin turbo
no shite

5. rx7 rotary turbo (fd)
this would be the coolest and best option in many ways but it will break your heart trying to fit as every single thing will have to be modified and custoim exhaust etc etc.

6. levin 1.6 20valve on trottle bodys
not powerfull enough for a 180
cosworth-power
22-02-10, 21:57
RB25 it, they go well in any i've seen e.g robert barnett's..seen at the udc
way2fastforu
22-02-10, 22:01
i sure can if the price is right:D

was hopin ya'd gimme it free:p:p:pcan drop it in myself:D
nikkisixx69
27-02-10, 12:46
be brave and different and go with the rotary!

and as for the z32 engine done even think about it, they are meant to be a pig to work on

fact! but that said, it has been done, the zenitani ps13 had one in it and could do 200mph!!!!

http://www.tougeheroes.com/blogsite/wp-content/themes/arras-theme/library/timthumb.php?src=http://www.tougeheroes.com/blogsite/wp-content/uploads/2009/07/cimg0531s.jpg&w=630&h=250&zc=1

http://img231.imageshack.us/img231/1141/cimg0394d.jpg


in action!!!!!!!
http://www.youtube.com/watch?v=RUd9ycvDuTA
Stonie
27-02-10, 13:55
any interest in a 02 5.0 v8 m5 engine with getrac 6 speed manual box ecu loom drive shaft the lot! This engine is in a different league to the list you have, over 400hp out of the factory and if you really want power just bolt on a turbo and you will see 800-900hp! Oh and the noise will not be beaten from this thing!
driftfan
27-02-10, 14:23
2jz hands down
nikkisixx69
27-02-10, 14:23
any interest in a 02 5.0 v8 m5 engine with getrac 6 speed manual box ecu loom drive shaft the lot! This engine is in a different league to the list you have, over 400hp out of the factory and if you really want power just bolt on a turbo and you will see 800-900hp! Oh and the noise will not be beaten from this thing!

fuck me running!!!:eek:
Stonie
27-02-10, 14:41
fuck me running!!!:eek:

ha ha exactly!:-)

oh and the torque need i say more!:-)
nikkisixx69
27-02-10, 14:50
ha ha exactly!:-)

oh and the torque need i say more!:-)

man v8 for the mother fuckin win!!!
Stonie
27-02-10, 14:53
man v8 for the mother fuckin win!!!

i agree:-)
Dunnedriftin
27-02-10, 15:04
any interest in a 02 5.0 v8 m5 engine with getrac 6 speed manual box ecu loom drive shaft the lot! This engine is in a different league to the list you have, over 400hp out of the factory and if you really want power just bolt on a turbo and you will see 800-900hp! Oh and the noise will not be beaten from this thing!

These engines are unreal!! :eek:

drove a M5 and the fooking noise outa her is un-beatable! and the power, no need for full trottle with one of these!
way2fastforu
27-02-10, 15:25
v8 m5 engine doooooooooooooooooooooooooooooooooooooooo it!!!!!!!!!!!!!!!!!
stack-180sx
04-03-10, 00:56
2jz all da way or if you want to keep it nissan RB30 the shit of it :D
pony1
04-03-10, 10:11
jz all the way
ejf86
04-03-10, 11:38
2jz for that sweet sound:)
Mick K
04-03-10, 11:42
If your going Jz be prepared to spend a few quid on fans,Bitch to keep cool.
Steo84
04-03-10, 11:45
any interest in a 02 5.0 v8 m5 engine with getrac 6 speed manual box ecu loom drive shaft the lot! This engine is in a different league to the list you have, over 400hp out of the factory and if you really want power just bolt on a turbo and you will see 800-900hp! Oh and the noise will not be beaten from this thing!

how much for the complete conversion??