View Full Version : Wanted: mappable rb25det ecu (preferably power fc)
Series 2, what's on the market, new or used
slithertooth
20-07-14, 20:22
Objections to Greddy emanage ultimate?
:-)
To be honest lad only lack of knowledge.. Like as u know most people will go power fc if financially possible but hard to come across cheap ish one for rb.. Lack of knowledge tho, iv no experience with them but plenty with the FC.. Like it's all hear say so not sure.. Stuff like is it true it's not possible to retard timing and limited with stuff or is that just the older emanage blue?. And having to change loom too.. And the way some say need MAP and take out MAF, but Greddy sight describes them as cheap way of mapping a car without having to change original engine sensors and looms ect?
slithertooth
20-07-14, 21:53
To be honest lad only lack of knowledge.. Like as u know most people will go power fc if financially possible but hard to come across cheap ish one for rb.. Lack of knowledge tho, iv no experience with them but plenty with the FC.. Like it's all hear say so not sure.. Stuff like is it true it's not possible to retard timing and limited with stuff or is that just the older emanage blue?. And having to change loom too.. And the way some say need MAP and take out MAF, but Greddy sight describes them as cheap way of mapping a car without having to change original engine sensors and looms ect?
No worries lad
Not saying no either lad, just saying I'd greatly appreciate more Info from anyone that has more knowledge :)
Dunnedriftin
20-07-14, 22:15
Why not go nistune ??
I just read that they now have a update so vct can be used with a rb20 ecu now as well
Nistune if u can get ur hands on rb20 cams. Get onto Richard bradley
Iv rb20 cams trun around.. How available are nistune on the market?
I've an ECU from a Z32 that you can use Nistune on an RB25 with VVT control. Planning on using it when I swap out the RB20 but it's not going to happen anytime soon. PM me if you're interested.
slithertooth
21-07-14, 09:24
Not saying no either lad, just saying I'd greatly appreciate more Info from anyone that has more knowledge :)
Pick a mapper then have a chat with them about what you need
Nistune if u can get ur hands on rb20 cams. Get onto Richard bradley
Off topic but why use 20 cams in a 25 ?
Dunnedriftin
21-07-14, 17:40
Nistune if u can get ur hands on rb20 cams. Get onto Richard bradley
Whats this big thing about rb20 cams ??
intake cam has slightly bigger lift on the intake that's all ?
RB20DET Camshaft duration 240°in, 240°ex lift: 7.3mm in, 7.8mm ex
RB25DET Camshaft duration 240°in, 240°ex lift: 7.8mm in, 7.8mm ex
Nistune done make a ecu for rb25 so they do away with vvti and u use rb20 cams then u get a map able ecu for cheaper
Dunnedriftin
22-07-14, 02:58
I still don't understand why 20 cams.. can still map with without the vct :$
oh and no nistune have released a new patch / update to run vct on rb25 with a 20 ecu
Power fc off Japanese performance, sorted :)
Thanks dudes
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.