View Full Version : Project pink fleshlight.....
Bonjour ! :D
Names chris been on here for a while said id throw up a project thread on the owl bus ! so here goes..........
Firstly, bought the car off driftworks from a guy up north bout a year and a half ago . For the first year it was a disaster every mans nightmare ELECTRICS !! ,as well as electrics i had come home the night of the terrential floods we had back a good while ago and water had gone down the firewall and down into the grommet for the loom ,yes ECU ! AFM loom destroyed from corrosion when drying out causing a disaster , while dat was in getting sorted crank pick up lobe thingy on the cam snapped off and wouldnt let car turn over ! so that was sorted and i was back on the road a year later !!!!!!!! when i had her back she got taxed cleaned tyres just a few bits here and there ...........so a week or so went by and afm loom struck again this time it got stripped out dryed cleaned and taped up bingo,thanks to ian byrne in clane genious !!!!
So now i was properly back on the road and i went on the hunt for an ecu funninly enough it came with a standard one ,so i searched and searched and searched and finally got a power fc off JPS trading in japan........
ecu went in and was sent on her way to westward !! car wouldnt boost past 0.5 so it got mapped to that, found the problem sent it back down and remapped again wont go into it but wasnt happy at all !
So it went to a friends friend in the game coture autos on my mates rollers ,got the car back alot better than before so was delighted!!!
And now this is where she stands 0.9 bar 285 bhp !
pickie poos !
day 1
http://i878.photobucket.com/albums/ab347/git_08/driftworkspics2.jpg
http://i878.photobucket.com/albums/ab347/git_08/driftworkspics3.jpg
http://i878.photobucket.com/albums/ab347/git_08/driftworkspics4.jpg
http://i878.photobucket.com/albums/ab347/git_08/driftworkspics.jpg
curent state !........
http://i878.photobucket.com/albums/ab347/git_08/frontskyline.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline001.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline002.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline003.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline004.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline005.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline006.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline007.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline012.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline014.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline015.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline016.jpg
http://i878.photobucket.com/albums/ab347/git_08/skyline13-1-10.jpg
fitting camber arms
http://i878.photobucket.com/albums/ab347/git_08/fittingcamberarms.jpg
http://i878.photobucket.com/albums/ab347/git_08/rearcamberarms2.jpg
http://i878.photobucket.com/albums/ab347/git_08/rearcamberarms.jpg
spec:
suspension/drive train-
hsd coilovers
rosejointed antirollbars
cusco front and rear struts
tomei electronic hicas
driftworks rear camber arms
nismo 2way lsd
half roll cage (have full but too much for the road... fag i know lol:D)
os giken twin plate clutch (heavy lol)
engine-
td06 turbo, top mount manifold big gay laggy yoke:D
trust external wastegate
trust bov
trust hard pipes
screamer pipe
itg air filter
apexi avcr
apexi pfc
oil and water temp swoosh gauges
supposed forged bottom end
splitfire coilpacks
kakimoto exhaust decat custom down pipe to suit tubby
fmic
relocated oil filter/earls oil cooler
oil catch tank
fuel pressure reg
walbro fuel pump
z32 afm (was originally a subaru one lol mad japs)
all new samco hosing and jubilee clamps
theres more but i cant tink of it lol
car getting sent to paul soon enough for a full rebuild / freshen up !!!!:D
All comments good and bad welcome !!
Chris !!!:D
sweet jammer man love the r32s
Jay Rockett
13-01-10, 22:45
Nice man, looks very clean in the last pics! and i thought it was relatively standard untill the pic of the TD06!!
Looks silly clean man :cool:
very nice man , wheels suit it down to the ground ! ;)
Shiny.... like my head! Cant bate a sweet lookin 19 year old :D
Nice car...
some pull out of this car with that turbo..and that screamer pipe is deafening
http://img43.imageshack.us/img43/8905/84599340.jpg
another nice pic of the 32:)
I remember you trying to explain the whole history of your car with the electrics and so on... the worst that can happen tbh! pain in the arse so it is!
Glad its in a very working and sideways condition at the moment :cool:
thanks dave man(padear) !
very clean! but 285 at that boost with a td06??? why so little?
very clean! but 285 at that boost with a td06??? why so little?
i dunno man i really dont ! this is a pm jobbie haha i could start tuning holy war
cool 32man,say it sounds sweet wit the external wastegate
Dunnedriftin
14-01-10, 01:25
its even cleaner in the flesh!! :)
i dunno man i really dont ! this is a pm jobbie haha i could start tuning holy war
yeh haha, it always does! woulda got about 100 more in TDP i reckon:D mr safety mr tracey loves keeping power down:D:D
Nice 32, always wanted one! Until i discovered 1j Powa!! Very nice tho
yeh haha, it always does! woulda got about 100 more in TDP i reckon:D mr safety mr tracey loves keeping power down:D:D
Ill tell ya over a pint if we meet one day !lol
Nice 32, always wanted one! Until i discovered 1j Powa!! Very nice tho
thanks !........
cool 32man,say it sounds sweet wit the external wastegate
ye shes very fluttery hehehe !
Thats a nice clean looking 32. Looked alot nicer rolling on the wheels in the first few pics IMO.
Thats a nice clean looking 32. Looked alot nicer rolling on the wheels in the first few pics IMO.
ye i know dude but they were in bad knick had to go :rolleyes:
Forgot to mention tints now gone and half cage in......... also project mu pads and braided brake lines to add to the spec.........
ah no new ones look way nicer imo, pics of cage pleauszz
s14sideways
14-01-10, 15:54
class car r32 lad :D
ah no new ones look way nicer imo, pics of cage pleauszz
will do soon as i can, very dark comin home from work yano ! il do it the weekend give her a wash if the water is on hehehe:D
class car r32 lad :D
sound............!
plans for the rebuild are ............
head-
mhg prob.cosworth
slight skim clean, oil seals
reseat valves etc etc
arp head bolts
rocker gasket etc etc
bottom end-
new rings
polish balance crank
forged pistons, if there not already done like there supposed to be so we'll have to wait and see !
clean and hone etc etc
new seals everywhere for the sake of doing it ,when in rome and all :D
freshen up rocker cover few other bits
and a remap off someone that can get me better more responsive power for skidn as its a joke at the mo :D
seen this up in bkt last night loving the cage real tight looking. cars looking well
seen this up in bkt last night loving the cage real tight looking. cars looking well
wat wer ya drivn jay ???
UPDATE -
Ordered today a ..........1.6 mhg
arp headbolts
genuine nissan head set
genuine nissan rear handbrake shoes :D
should be here next week.....................
added to the list genuine nissan oil pump ......just off the phone from the nismo shop west covinia ! :D ........
wat wer ya drivn jay ???
was in the ukdm teg white one... its de new jammer
nissan_doctor
03-02-10, 00:01
added to the list genuine nissan oil pump ......just off the phone from the nismo shop west covinia ! :D ........
Were you talking to Justin? You won't go wrong with them.
Dunnedriftin
03-02-10, 00:14
Cage looks well in her chris!
Good luck with the rebuild, TDP should be able to sort you out on a remap, robbie is fair handy with the RB's! Thats where il be sending mine when it comes to it..
Were you talking to Justin? You won't go wrong with them.
No was a bloke called ray spot on ,had to ring him back over something and he was able to sort it out ,he cudnt understand the dublin talk ha was funy :D
Cage looks well in her chris!
Good luck with the rebuild, TDP should be able to sort you out on a remap, robbie is fair handy with the RB's! Thats where il be sending mine when it comes to it..
lets hope he is eah !.......
AND IT BEGINS ! paul you may take over :D
nissan_doctor
11-02-10, 10:43
So the build process has started at last a day or so late.:rolleyes:
Here are the first few pics.
Brought in to begin:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9407.jpg
Removing the gearbox, quite a bad leak from around the gear selector:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9408.jpg
Gearbox removed to reveal a Nismo paddle clutch(don't know if you knew that was fitted)
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9409.jpg
And a Nismo flywheel:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9410.jpg
The engine ancillaries getting stripped ready for removal:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9415.jpg
More to follow....
love the Datsun racing poster!! old skool! besta luck with the build dude!
ha love suprises good man pablo ........ :D
kev.skyline
11-02-10, 18:56
ive always liked this yoke, tis very clean. will be nice when its finished.
savage, free Nismo clutch an flywheel for you boyo! whats the master plan for her?
savage, free Nismo clutch an flywheel for you boyo! whats the master plan for her?
Ye ha well i had a feeln there was sumtn in it alrite but nismo is cool with me lol ......well i got the news re: the bottom end today shud be pics up later on as my gut feeling went she wasnt forged but we wont cry over it :D , all in good shape as she stands ...paul will be on later and tell us the story rory :)
ive always liked this yoke, tis very clean. will be nice when its finished.
tanks man ......daves mate ??????
kev.skyline
11-02-10, 19:30
tanks man ......daves mate ??????
i am indeed:D
i am indeed:D
ah hows things long time no skiddn session ! lol
nismo clutch and fly..You jambag ya..
nissan_doctor
11-02-10, 20:58
Here are a few more,
Engine ready to be lifted:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9416.jpg
And removed:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9417.jpg
The resulting hole, alot of tidying to be done in here:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9418.jpg
Engine on the stand ready for the strip down:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9419.jpg
Inlet side striped:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9420.jpg
And exhaust side gone:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9421.jpg
Head removed:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9422.jpg
This engine was rumored to have forged internals but unfortunately its all stock inside, even the head gasket!
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9423.jpg
never thought id see this day happenin , :)
os giken twin plate clutch (heavy lol)
:confused::confused: nismo???:p:p
only buzzin
:confused::confused: nismo???:p:p
only buzzin
ur gay ! only buzzn :p:p
nissan_doctor
16-02-10, 00:57
A few more of the bottom end.
Sump removed:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9428.jpg
Main caps/ladder etc removed. The engine had all standard Nissan bearings etc fitted.
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9429.jpg
Crank removed:
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9430.jpg
All the insides....outside:D
http://i174.photobucket.com/albums/w112/RPMotors/DSCF9432.jpg
plans for the rebuild are ............
head-
mhg prob.cosworth
slight skim clean, oil seals
reseat valves etc etc
arp head bolts
rocker gasket etc etc
bottom end-
new rings
polish balance crank
forged pistons, if there not already done like there supposed to be so we'll have to wait and see !
clean and hone etc etc
new seals everywhere for the sake of doing it ,when in rome and all :D
freshen up rocker cover few other bits
and a remap off someone that can get me better more responsive power for skidn as its a joke at the mo :D
TDP for the win,he the skyline man,done my bro s 32 and all my mates skylines which are all beasts as well, u wud av seen my bro s red 32 at last D.I day i think.. he had it wid a different tuner before tdp as he siad the difference is night and day massively
TDP for the win,he the skyline man,done my bro s 32 and all my mates skylines which are all beasts as well, u wud av seen my bro s red 32 at last D.I day i think.. he had it wid a different tuner before tdp as he siad the difference is night and day massively
yea tanks for the advice man im goin to give him a shot ......! i want rid of the lag i hate it arrgghh, paul loves it tho :D .......you drive the red 32 rite ? nice yoke to skid ! :)
Update- main and big end bearings ready to rock ,pistons a one off 0.5 mm oversized and none in stock any where in the solar system :D so had to get them made specially just for me cause im great :D went for Forged J.E. Pistons in the end ........ so just waiting on pistons to be made then the whole lot are coming toghether then we can get cracking .......well i mean paul can :D ! .........oh and engine bay got a degreasing and removal of some crap just to tidy things up ..............just a waiting game now :)
big love !
cruising_r32
09-04-10, 11:30
Its cool reading through your thread as my car is in with paul at the moment but is a week or two behind yours.
The West Covina guys are real helpful, you must be the guy who lives in a house without a number.
I was on the phone to them the day after you ordering an oil pump, the guys thought it was crazy selling two R32 pumps in two days to two Irish lads.
Its cool reading through your thread as my car is in with paul at the moment but is a week or two behind yours.
The West Covina guys are real helpful, you must be the guy who lives in a house without a number.
I was on the phone to them the day after you ordering an oil pump, the guys thought it was crazy selling two R32 pumps in two days to two Irish lads.
Thats me man ! ha .....ye the house without a number hahah it was actually dhl's fault but only in ireland would you get that ! ha........you getting new pistons aswell by any chance ? ? cause im still waiting for mine ! :mad:
cruising_r32
09-04-10, 15:45
no new pistons for new, not this time around anyway.
Just a full rebuild and freshen up, all the gaskets, shells, bearings, oil pump etc
Can't wait to get it back :D
likewise ha ! see ya up there maybe some day ! :)
change of plan ! je let us down on the pistons so getting a set from cp pistons now so should have them in 2 weeks or so ! :) ...........................and then hopefully we can get started again ............ big thanks to paul for the patience :)
wow that looks like some job . cant wait to see it finished !!:)
fcukin retards with their bloody pistons.!!
fcukin retards with their bloody pistons.!!
who ya teln padear ! pain in the holeski !:mad:...........im dealn with the best tho (richard in r.b motorsport) so i wont be let down fingers crossed :D
Update-
got the rocker covers painted last week here they are ,and also new doggie :D
http://i878.photobucket.com/albums/ab347/git_08/148.jpg
http://i878.photobucket.com/albums/ab347/git_08/151.jpg
http://i878.photobucket.com/albums/ab347/git_08/135.jpg
nissan_doctor
08-05-10, 19:00
All we need now is some pistons and to bolt those covers to the engine!:rolleyes::D
nice colour on the rocker, any pics of them on the car yet?
All we need now is some pistons and to bolt those covers to the engine!:rolleyes::D
i never thought pistons would be the story of me life for so long ha ! :D
nice colour on the rocker, any pics of them on the car yet?
are u takn the piss haha nah man im waitn on pistons the last 15 years haha ! :)
are u takn the piss haha nah man im waitn on pistons the last 15 years haha ! :)
haha ye just read back thru your thread, fyl!!
nissan_doctor
08-05-10, 20:46
i never thought pistons would be the story of me life for so long ha ! :D
I believe a donkey was seen leaving the CP factory in California a few weeks ago with 6 pistons strapped to his back, I'd say he is doggy paddling the north Atlantic as we speak!:D:D
I believe a donkey was seen leaving the CP factory in California a few weeks ago with 6 pistons strapped to his back, I'd say he is doggy paddling the north Atlantic as we speak!:D:D
no the ash fumes from iceland are obstructing his view man, its another 20 years and this skyrocket will be alive....
as i told ya earlier, the covers are noice man !
I believe a donkey was seen leaving the CP factory in California a few weeks ago with 6 pistons strapped to his back, I'd say he is doggy paddling the north Atlantic as we speak!:D:D
ye and i heard the donkey has no fuckn legs so im bollockd now :D
UPDATE -
Finally pistons arrived at rb motorsport today after what seemed like an eternity to be made ,they should be here early next week then up to paul along with the bearings
also bought these today from a guy called shane from drive n style nice bloke on the phone must say !
-Steel steering bush to replace rubber one ! thanks to D.I for that i seen the post on here by sRAY !
-Rear toe rods
http://i878.photobucket.com/albums/ab347/git_08/reartoerods.jpg
-front camber arms
http://i878.photobucket.com/albums/ab347/git_08/frontcamber.jpg
jeasus dat donkey must of had a engine cumin out his arse :p
great news tho cuz :D
Updates soon ......pistons should be here by the end of the week ! 6 of the finest cp race spec forged pistons and main and big end bearings finally we get going again ! pics to follow ................
yyeeeeeeeeeehhhhhuuuuuuww finally the feckn pistons are here well worth the wait they are seriooous lookin yokes :D im sure paul will put up pics of them ,block off to machine shop in the morning for boreing (spelling) etc etc, leave it over to you now paulie :D ...................
nissan_doctor
24-05-10, 19:09
Well the parts have finally arrived to meove on this build.
All the parts, New custom made CP pistons, rings, main and big end bearings,
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF9985.jpg
These pistons have been custom made as a one off for this build, They look too nice to hide inside an engine.:D
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF9986.jpg
They are .5mm oversized at 78.5mm and have extra oil channels to aid cooling.
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF9989.jpg
Build pics to follow...
wow them pistons were really worth the wait! :eek::)
best of luck with the build now
wow them pistons were really worth the wait! :eek::)
best of luck with the build now
thanks dude
nissan_doctor
09-06-10, 15:44
Right, finally got a start on this a little behind scedule.
Some pics...
Old pistons seperated from the rods,
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF10134.jpg
New forged piston fitted,
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF10142.jpg
And all 6,
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF10145.jpg
The cleaned and bored block, Now 78.5mm cylinder bore,
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF10015.jpg
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF10146.jpg
Oil spayers fitted along with new main shells,
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF10147.jpg
and were off again !ha no more stopping this time :D ...........paul lead the way !
A couple of pics of the bottom end back together...well almost, Yet another issue with the big end bearings is going to delay it again though :rolleyes:
http://i878.photobucket.com/albums/ab347/git_08/build1.jpg
http://i878.photobucket.com/albums/ab347/git_08/build.jpg
nissan_doctor
03-07-10, 19:15
A pic of the bottom end fully assembled at last...
http://i174.photobucket.com/albums/w112/RPMotors/test%20folder/DSCF10402.jpg
Should be nearly there now to drop in yeeeeewwwwww !! :D
say your dyin to get this on the road!
man im like an antichrist drivn that poxy van !! just want my life back haha
getting nearer to completion .........
http://i878.photobucket.com/albums/ab347/git_08/nearertocompletion.jpg
can't imagine being away from your baby for so long :mad:
can't imagine being away from your baby for so long :mad:
your my baby dave :D ,but ye jesus christ its been a long one !
Dunnedriftin
14-07-10, 23:37
say you be needin a new set of tires on the new dyna if this aint ready soon! :D
say you be needin a new set of tires on the new dyna if this aint ready soon! :D
ye can say that again boss !
nearly there now . . . . . .
paul thinking hes an rb20
http://i878.photobucket.com/albums/ab347/git_08/enginegoingback.jpg
cylinder head lookin all deadly :)
http://i878.photobucket.com/albums/ab347/git_08/reconcylinderhead1.jpg
http://i878.photobucket.com/albums/ab347/git_08/pullieson.jpg
cam covers with some paint on them also lookin mahhooossive
http://i878.photobucket.com/albums/ab347/git_08/camcoverson.jpg
nearly forgot this to keep thigs tight at the wheel
http://i878.photobucket.com/albums/ab347/git_08/steeringbush.jpg
.......more updates as the week goes on hope you all like the pics
coming along nicely dude just keep it sideways when shes up and running none of this fast speed crack ends in tears!...youl be in mondello for the practice days next year i hope makin loads of loud turbo noises lol
Titan Autoworks Japan
19-07-10, 23:47
nice build:D
looking good chris, cam covers look the part who painted them for you ;)
as they say here on drift ireland yeeeeeeeooooooowwwww
So so close and very happy with the work !!
timing belt on along with the snail !! :)
http://i878.photobucket.com/albums/ab347/git_08/turboon1.jpg
inlet mani half on
http://i878.photobucket.com/albums/ab347/git_08/inletmanion1.jpg
finito !!!!!!!!!
http://i878.photobucket.com/albums/ab347/git_08/finished1.jpg
showing full cam t.b covers spanky purple !
http://i878.photobucket.com/albums/ab347/git_08/turboon2.jpg
and there she is lads ready to go home !!
http://i878.photobucket.com/albums/ab347/git_08/finished2.jpg
hope ive keept every one interested and thanks for looking yet again :)
looking good chris, cam covers look the part who painted them for you ;)
thanks man ! lol whos this ?
That is rather tastey looking!
That is rather tastey looking!
thanks mick ! nice to hear from a man of your status :) !
If it goes as good as it looks, it'll be an animal. :)
If it goes as good as it looks, it'll be an animal. :)
it has to this time ! lol
Robbie Daly Ps13
21-07-10, 23:01
thanks mick ! nice to hear from a man of your status :) !
Bahahahhahahahahhahaha....! I love this....! The superstar that is mick kenny biggest critic going.....! Good work lad top notch by the looks of things hope all gos well on the map no doubt it will......!
turbo asti
21-07-10, 23:07
Should put a clear cam gear cover on Chris.Cheap enough and look the nuts!
Bahahahhahahahahhahaha....! I love this....! The superstar that is mick kenny biggest critic going.....! Good work lad top notch by the looks of things hope all gos well on the map no doubt it will......!
haha ah micks a good man dude :) !..........thanks tho but credit where its due to paul ,nissan doctor top work and excellent updates and never let me down .......... the mapping will be the big one as you said !!
Should put a clear cam gear cover on Chris.Cheap enough and look the nuts!
ill be honest man i totally forgot about seeing the pullies, bit of colour
sure maybe down the line il do it !!! hope them other things were ok for you ?
haha ah micks a good man dude :) !..........thanks tho but credit where its due to paul ,nissan doctor top work and excellent updates and never let me down .......... the mapping will be the big one as you said !!
lolz.........at.....you dude......!
:D
TWO MORE SNAPS ! :)
Fresh power steering belts on etc etc !
http://i878.photobucket.com/albums/ab347/git_08/DSCF10480.jpg
ready to go home in the morning , and a little D.I showing aswell
http://i878.photobucket.com/albums/ab347/git_08/DSCF10481.jpg
Robbie Daly Ps13
21-07-10, 23:20
haha ah micks a good man dude :) !..........thanks tho but credit where its due to paul ,nissan doctor top work and excellent updates and never let me down .......... the mapping will be the big one as you said !!
As said here awhile back iv yet to see as bad word said against the nissan doctor......! Top top man and top notch work by the looks of things........! As for mick k i never said a bad word against the man its just sad to see threads taken to heart...... :(
As said here awhile back iv yet to see as bad word said against the nissan doctor......! Top top man and top notch work by the looks of things........! As for mick k i never said a bad word against the man its just sad to see threads taken to heart...... :(
ah its all fun and games !! innocent fun sure :D
nissan_doctor
21-07-10, 23:26
Glad your happy with it so far Chris and cheers for the comments lads;)
Prodrifter86
22-07-10, 12:09
awwwww sweeeet! i want my engine to look like that yumm:eek::cool::D
thanks man ! lol whos this ?
tis me the lad who took 2 months to paint them for you lol
tis me the lad who took 2 months to paint them for you lol
haha dano ya litl goer ya :D
turbo asti
22-07-10, 19:19
ill be honest man i totally forgot about seeing the pullies, bit of colour
sure maybe down the line il do it !!! hope them other things were ok for you ?
Ye got me out of a hole.Fair play mate.
Cant wait to get my arse into the drives seat of this when she's ran in!!haha.i'll give ya a 4days and the break in mileage will be done known you...
Cant wait to get my arse into the drives seat of this when she's ran in!!haha.i'll give ya a 4days and the break in mileage will be done known you...
hahaha you know me too well , tryn to sus out this breakn the engine thing in ,some say on dyno others ,on the road !??
hahaha you know me too well , tryn to sus out this breakn the engine thing in ,some say on dyno others ,on the road !??
http://www.mototuneusa.com/break_in_secrets.htm :D
finally getting there !!
pics from work done yesterday ..................
lowering it in
http://i878.photobucket.com/albums/ab347/git_08/enginein1.jpg
and in !!!
http://i878.photobucket.com/albums/ab347/git_08/enginein.jpg
http://i878.photobucket.com/albums/ab347/git_08/inagain1.jpg
connecting fuel lines etc . . . . . .
http://i878.photobucket.com/albums/ab347/git_08/connectiniglines.jpg
nismo clutch and flywheel in .............
http://i878.photobucket.com/albums/ab347/git_08/clutchin.jpg
box in ..........
http://i878.photobucket.com/albums/ab347/git_08/boxin.jpg
more updates later thanks yet again ................
she's getting ther man drop up to me when she's all sorted ;)
she's getting ther man drop up to me when she's all sorted ;)
will do thanks chief ...........
looking good and good work as always by nissan doc..
excellant work done by the doc!!and well done for puttin up with chris through all of this!!haha........................................ ..................only buzzin chris:D
collecting it tonight and going to ring track day now to organise mapping and running it in . . . . . . . happy days :) . . . . will keep thread updated on power results etc etc
Good stuff! What turbo is that, 13 pages is too much to read through :D
ah I see, very good. I got a td05 to go on mine. i look forward to seeing your power figures!
ah I see, very good. I got a td05 to go on mine. i look forward to seeing your power figures!
so do i !! electrical problem has come back to haunt me , so fuckn disheartn at this stage ,goin to strip the afm loom down tomorrow up in pauls examine it ,check continuity ,connetions etc ,as when i disturb the loom it causes a hunt or jump in the revs and also napping out ..........
..................
We tried a new ac valve yest and a brand new z32 on it .......until i mentioned the loom (see 1st post on thread as to why ) i pulled the loom for the afm/injectors about and got some what of stable/better idle so off with all the insulating tape to examine the loom tomorrow have an electrician mate with me who is very skilled at this stuff so hoping he can help ...........and i can make my booking on wednesday
..............but at the moment to say the least im ragn over it ,yet keepn the head up to get it sorted and move on .....
Home finally !!!!!! Big thanks to paul pretty much spent the day on saturday scratchn our heads and hold rosary beads hoping that we would find the problem . . . . . . . . . . . . . . .
Low and behold it was the common faulty cas !!! ....we had a spare one there ready to go so we banged that on and boomski !!!! she ticked over like a mouses heart . . . . . . . . . . . . . . . fuckn delighted :D , wasnt the word ! the smile on pauls face was as big as mine cause the car just didnt want t leave that garage at all we had one other small issue nothing major 2 sec job and that was it , left the garage with me out of date insurance cert (was insured) and 4 months outa tax :D ............. and believe it or not a bita nct in the window :D
Off to tdp on wednesday morning for a quick base map then run it in for a while before i go on holidays portugal might i add :D then when i come home , finish off running it in before the final map to finally up the boost and get this snail working ....................... :D
ill bang up a pic later on as it stands now
peace out
@ peter and its top mount ,dont know wether urs will be or not ??
@ peter and its top mount ,dont know wether urs will be or not ??
nope mines a low mount, on the standard mani. Internal wastegate
nope mines a low mount, on the standard mani. Internal wastegate
top ,uprated , external lol :D
Wel this probably has a few thinkn what happened this yoke .............. put it this way ill start a new thread during the week and start from fresh ! . . . . . . . . . . . :mad:
Dunnedriftin
19-09-10, 23:24
Wel this probably has a few thinkn what happened this yoke .............. put it this way ill start a new thread during the week and start from fresh ! . . . . . . . . . . . :mad:
I heard.. :( be finato soon i hope, near 10 months of the road?? Start a new thread would be a good idea, stop some confussion
aint likin the sound of this, not a horror story i hope lad!
you dont want to know mate you really really dont !
ah jesus she didn go bang did she . . . . read the whole thread but first post!id be sick for ya if it did!
went more than bang ! lads ill be making a new thread and i can talk then but for now yes most know what happened and it is getting rebuilt as we speak by a reputable firm , and i hope for great results as this car has been away now for nearly a year ...............probably the most dishearting thing ever trust me . . . . . . . . . . .
slithertooth
19-09-10, 23:54
Was wondering what was happening with this,hope it's not all bad
Was wondering what was happening with this,hope it's not all bad
think the worst then treble (spelling) it
slithertooth
20-09-10, 00:04
Shit dude ,feel for ye, hope it comes right for ye in the end
Ah bollox. Sorry to hear something went wrong.
the joys of cars stick with it man hope its sorted soon
Ah bollox. Sorry to hear something went wrong.
greg change your something to everything . . . . . . . . . .
Shit buzz!! Been through it before not nice at all!
ah fuck :( can you pm me what happened, as im sending my rb off for work and dyno soon and dont want to have the same person/thing happen it
Shame what happened her lovely!
RITE !!! .......Me bollocks am i startn a new thread ill just keep this goin and keep it short and sweet ..........engine let loose and is now up in tdp getting a full rebuild from top to bottom due to the serious amounts of damage after being done, not alot could have been saved so alot was replaced ........................should see block together by the end of the week, robbie more than welcome to shed light on the work being done to educate us all if he wishes .............. other than that its in good hands and ill keep the thread updated as best i can as i know alot of folk are rebuilding/tuning rb20's these days and it might be very helpfull ................
cheers chris !
shit buzz dude
wat gave up big ends or head gasket or wat
shit buzz dude
wat gave up big ends or head gasket or wat
@ podge what didnt give up !!
kev.skyline
20-09-10, 17:34
shitty buzz man, hopefully itll be sorted soon.
shitty buzz man, hopefully itll be sorted soon.
sorry kev ment t p.m you after i seen ya send me your number ill txt it
kev.skyline
20-09-10, 17:52
pmd you there chris
did nissan doctor not build the engine already am a bit lost??
Dunnedriftin
20-09-10, 21:04
did nissan doctor not build the engine already am a bit lost??
Yeah your right. Your not lost, engine is being built by TDP now.
Yeah your right. Your not lost, engine is being built by TDP now.
I tought he knew his stuff hence the name??
:rolleyes:
slithertooth
21-09-10, 13:59
Did it happen during the run in or on the rollers,
Did it happen during the run in or on the rollers,
rollers ......
slithertooth
24-09-10, 16:09
Shit dude that suck's what the build spec's this time ,
car due to be finished and ready to go next tuesday or wednesday all going to plan . . . . . . . .
will keep thread updated with power figures and all that crack .................
car due to be finished and ready to go next tuesday or wednesday all going to plan . . . . . . . .
will keep thread updated with power figures and all that crack .................
Nice one chris, its been to long off the road :(
Nice one chris, its been to long off the road :(
I felt bad for it so bought new shoes for it too pics later ! :D
mick-skyline
29-09-10, 11:47
I felt bad for it so bought new shoes for it too pics later ! :D
some man, feel sorry for me and buy me new shoes :p
some man, feel sorry for me and buy me new shoes :p
ha ha ha ........these yokes are wide ! pm on route
Pics of the rimmage or gtfo!
pics of the rimmage or gtfo!
x2......... :D
were gonna need pics of these wheels chris! text it to me!
http://i878.photobucket.com/albums/ab347/git_08/gram.jpg
pow x2 minters
Chrishst.....Thems nice Laaaawwwwwd!
Whats the stats on em?
tyres are 265's so emmmmm ha hold on !
there fucking SAVAGE. you buy them off kieron?
Fredericks Balls
29-09-10, 14:54
Sure did, they cleaned up pretty fucking good too! First time they got a wash. Some stretchy rubber and they will be good to go!
maaaaaan, i want to slap you for selling them!
Sure did, they cleaned up pretty fucking good too! First time they got a wash. Some stretchy rubber and they will be good to go!
defo man i tink the arch rollin man will be getting a call to ha .....any one got sometn similar on an r32 and hows there fitment ?
http://i878.photobucket.com/albums/ab347/git_08/gram2.jpg
just to show off :D
http://i878.photobucket.com/albums/ab347/git_08/gram3.jpg
maaaaaan, i want to slap you for selling them!
peter shut it ha ha :D
what sizes are they? there on that sticker that i can see in that pic
you most defo wont need to roll your arches...but there such a sweet looking wheel woo woo
you most defo wont need to roll your arches...but there such a sweet looking wheel woo woo
really man ??! im a crap wheel info. person so !! ill take your word for it cool :)
yeh, +38 is a tame offset....still though, set of spacers and theyd still look mega
mick-skyline
29-09-10, 16:30
Space them out stretch the rubber and they'll be the dogs dangles. Love the shoes git.
defo man i tink the arch rollin man will be getting a call to ha .....any one got sometn similar on an r32 and hows there fitment ?
think these are the same size and offset man il try get a better pic later http://i686.photobucket.com/albums/vv230/evomano/IMG_0167.jpg
Hows She coming along ? :)
Well Chris any update on the re-rebuild ??
stumpyskyline
08-10-10, 22:00
Very nice mate :)
tuesday or wednesday lads with a bit of luck ! hoping that tdp got a delivery today mapping it the start of the week all going to plan ............ ill post pics and specs after thanks for the interest men ! :)
also ordered solid bushing kit from across the water and bought a new steeerdn ' wheel ! deep dish suede sparco one ! so that momo one is there whoever wants it !
free steerin wheel for me chris!!:D ah you shouldn't have;)
slithertooth
16-10-10, 18:19
Well lad is it running
mick-skyline
21-10-10, 18:50
Nice figures there Chris, hope it stays on the road now... Enjoy it.
Oh yeah let this lot know too. :p
big thanks to tdp top men and women down there,couldnt be happier
360 bhp and 330 ftlbs of torque good night and good luck to ya ,happy out :)
big thanks to tdp top men and women down there,couldnt be happier
360 bhp and 330 ftlbs of torque good night and good luck to ya ,happy out :)
Glad your happy Chris, enjoy the horsepowaz!!:D
Nice figures say your delighted, What happened witht he previous situation?
Dunnedriftin
21-10-10, 19:50
fook, i was expecting more? :cool:
big thanks to tdp top men and women down there,couldnt be happier
360 bhp and 330 ftlbs of torque good night and good luck to ya ,happy out :)
me likey! call down n gis a spin!
Dunnedriftin
21-10-10, 19:56
me likey! call down n gis a spin!
fuk you, call round to me :p try keep catherine outa it & from knockin trees down! :D
S14a johno
21-10-10, 19:57
yaaaaaaaaaaoooooooooooooooooooooooo
she back and running
nice figures :cool::cool::cool::cool:
say she can move more faster then a bat out of hell
cant wait for a spin in her :D:D:D
Fredericks Balls
21-10-10, 21:05
Congrats mate i'd say your chuffed. Enjoy!
Was it running much boost to get those figures?
1.3 bar i think im not great @ remembern stuff ! :D
Dunnedriftin
21-10-10, 22:30
1.3 bar i think im not great @ remembern stuff ! :D
no your fairly shite.. still waiting on you to look at a fireplace for me! :p
Glad your happy Chris, enjoy the horsepowaz!!:D
Thanks brendan ! and to the johnny fella too ! legends ........ see ya in a week or so ya can take it out for a blast :)
no your fairly shite.. still waiting on you to look at a fireplace for me! :p
see what i mean :o txt me 2mrw if she want me t look at it
Dunnedriftin
21-10-10, 22:34
see what i mean :o txt me 2mrw if she want me t look at it
il find out... prob leave it till next week or after! when im not up to my eyes ;)
slithertooth
21-10-10, 22:47
Congrat's lad , good to hear it's all sorted
nice one man, delighted for ya........ off to mondello on sunday? ur drivin ? :)
Fredericks Balls
22-10-10, 06:50
Ah feck it, once your happy and its running good thats the main thing!
fair play lad..
delighted for you.
you'd a shit time with it before..
drive the bitch now:D:D
^^^ thank you ,oh i will :)
good stuff chris about time to :D
bit of an update ......
Got the gram lights on the back now been onto dave o'h. trying to get me a wheel to make the set.
fitted the wheel turner , cage padding gave it a wash ,just been driving it latley nothing mad , few fiddly bits to do before im happy
wand on its way so bang that in soon as
thats pretty much have dave insejn on here to take a few snaps for me soon as we can get to it ,to keep kenny and the pic. heads happy :D
chris..............
oh and a bit of rent in the window too :)
Fredericks Balls
02-11-10, 20:52
pics pics pics pics :D
Well nearly two years on its gone from this . . . . . . . . .
http://i878.photobucket.com/albums/ab347/git_08/driftworkspics.jpg
to this forged rb20 fully rebuilt 360 bhp . . . . . . . . . . . . . .
http://i878.photobucket.com/albums/ab347/git_08/2010dedmber.jpg
update - well the brakes on the car are utter shite so took collection of these yesterday shud stop me now :D
http://i878.photobucket.com/albums/ab347/git_08/brakes.jpg
them gram lights are the doggies do das, looks amazing.... i would say a lil lower but it looks class
them gram lights are the doggies do das, looks amazing.... i would say a lil lower but it looks class
im working on the low :D thanks simon !
agree with si the gram ligths are amazing.. are they mr balls old wheels??
agree with si the gram ligths are amazing.. are they mr balls old wheels??
yes i belive so, sell them to me git!!!!
Prodrifter86
17-11-10, 14:21
Car looks so Sweeet now.
gram lights are Ausomo!! find two more and you are onto a winner :rolleyes:
fook me they were cheap if i remember correctly...
@ docco yessum :)
Update-
Ok girls today fitted two new brembo front dicsc's , drilled and grooved with pbr pads ! slight difference in braking still running them in will give the verdict soon while i was at it i fitted two new track rod ends to the front also ..... pics soon enough
also me wand came on friday evening so wana say thanks to finn in drive n style for his undertanding and great business like approach ,ur a gent man ! hope to sort that out one of the days and get it fitted correctly as ive heard to many bogey fitting story's etc etc
peace out a-town down
Dunnedriftin
21-11-10, 16:48
do you ever spend time with catherine? :p Always on here or working on the car!
Dunnedriftin
21-11-10, 16:52
do you ever spend time with catherine? :p Always on here or working on the car!
Il change that, she musta kicked you out, you just drove up the road :p :p
okkkkk.........
small gay update
new stoppers brembo drilled and groved with pbr pads
old ones off........
http://i878.photobucket.com/albums/ab347/git_08/IMG_0479.jpg
new ones on ........
http://i878.photobucket.com/albums/ab347/git_08/IMG_0484.jpg
and just threw on new track rods while i was at it
http://i878.photobucket.com/albums/ab347/git_08/IMG_0482.jpg
sorry for the pony quality pics...
Next up find another gram light to make the set , stock up on rubber and get it out skidn in the new year :)
pics......
http://i878.photobucket.com/albums/ab347/git_08/rearshot.jpg
http://i878.photobucket.com/albums/ab347/git_08/interiorshot.jpg
Winner winner:cool::D
MoAr please?
yes sir kev. :)
http://i878.photobucket.com/albums/ab347/git_08/rearwshop.jpg
http://i878.photobucket.com/albums/ab347/git_08/interior2.jpg
thats one cool skyline.... want a soarer? :D
the grams look sick on that, well done:)
thats one cool skyline.... want a soarer? :D
i still have to get it on track yet sorry man !
@ ste thanks !
Dunnedriftin
17-12-10, 22:28
Sell ya another black R32 :p
Fredericks Balls
17-12-10, 23:01
Yea, so I have been meaning to give you a shout. The cash you gave me that day for the wheels. Turns out two of the 50's were fake. Such a shame, cos the wheels looked ok on your car. Maybe i'll pop out to you next week and give them back to you and take the wheels back. Cheers
:D
Damn they look gorgeous. Well the whole car looks brilliant actually, so clean. I hope your getting to enjoy it finally.
kieran you bolocks hahahaha.............thanks ah one day im hoping to go make use of it :)
Fredericks Balls
17-12-10, 23:33
kieran you bolocks hahahaha.............thanks ah one day im hoping to go make use of it :)
:D Ah im sure you will. Once your having fun thats the main thing
daaayyyyuuuummm thats lookin good
Prodrifter86
18-12-10, 20:05
love the interior......! car is just sweeet
Im gonna be honest chris I have a serious horn!
and your car is nice too!
okay spec on the donkey
top mount turbo no brand possibly td06
trust manifold
trust external waste gate
with screamer pipe
trust bov (removed cause bov's are wank)
un known intercooler ,thatl be getn the bin aswell too small
z32 afm
splitfires
hks metal head gasket iirc
550cc injectors
arp head bolts
fresh nissan big and main end bearings
new oil pump/water
..............
Forged c.p. pistons oversized by .5mm +rings ect ect
deck cleaned bored ,cank balanced whole shabang
head skimmed cleaned ,valves checked ,pretty much rebuilt head and bottom end
.............
setup on apexi pfc and avcr boost controller
built by T.D.P
..............mapped on pfc aswell in or around 360 pony @ 1.3
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.