PDA

View Full Version : Soarer on Monoblocks ?


soarerpower
08-08-11, 15:36
Can anyone help me out i have a set of AMG replica wheels and want to fit them to my soarer but not sure if they will ??? dont have a clue about offset or fitament so any help would be apriciated :)
Spartacus
08-08-11, 15:48
If they came off a Merc or late VW MKV Golf, 03 onward's Passat etc etc then i'm presuming they are 5x112 pcd.

Soarer's PCD is 5x114.3. They could fit with wobble bolts but you'd have to check on the centre bore fitment of a standard Soarer wheel vs. the monoblock wheel in order to determine if you need to fit spigot rings or else widen the centre bore of the wheel.

If you don't know what you are doing it will seem like an awful amount of hassle for something which, unless done very right, will ultimately look wank.
Derk
08-08-11, 15:50
http://www.carlsalter.com/wheel_fitments.html
damo86
08-08-11, 15:56
www.dont be a lazy cunt and go out and try them on.com
harryk
08-08-11, 21:31
trying to imagin this in my head .. back wheels would need banded with a big dish to luke good !!!lol
Stevie e39 drift
08-08-11, 21:44
They'll be 5 x 120 pcd soarer is the same as silvias yeh? Then there 5 x 114.3 is it correct me on that but i think the amg's are 5 x 120 ...
RB26DETT
08-08-11, 22:18
They'll be 5 x 120 pcd soarer is the same as silvias yeh? Then there 5 x 114.3 is it correct me on that but i think the amg's are 5 x 120 ...



AMG's are 5x112.


Soarer is 5x114.3
benhachi
09-08-11, 11:53
pcd conversion spacers?
tezdude
09-08-11, 20:29
amg's on a JDM soarer???? pass the sick bucket:confused:
Stevie e39 drift
09-08-11, 20:47
AMG's are 5x112.


Soarer is 5x114.3

i have wheels on my bmw (5x120) which came of a bora amg's will fit the same as rs6's rs4's etc onto boras passats n a4s golfs and the likes .... so would they not be 5 x 120 aswell ???
Tomas_s13
09-08-11, 21:30
bmw 5x120
merc, vw, audi 5x112
nissan etc 5x114,3

have no clue how you fitted vw wheels on a bmw lad, sounds like magic :cool: or they where vw replica wheels with bmw fitment or smth...
Stevie e39 drift
09-08-11, 21:33
bmw 5x120
merc, vw, audi 5x112
nissan etc 5x114,3

have no clue how you fitted vw wheels on a bmw lad, sounds like magic :cool: or they where vw replica wheels with bmw fitment or smth...

nope .... they fit my vw transporter aswell coz we got a flat 1 day and stuck on a old drift wheel !
Diesel-Dick
09-08-11, 21:49
nope .... they fit my vw transporter aswell coz we got a flat 1 day and stuck on a old drift wheel !

golf/bora wheels are 5x100! nd u put them on a 5x120 hub!? wtf? lol :confused:
Stevie e39 drift
09-08-11, 21:54
I didn put them on , i put them on a transporter which im guessing is same as i seen the same alloys on a golf in Virginia at a dealer garage on Dublin road the other day ...??
Diesel-Dick
09-08-11, 22:03
I didn put them on , i put them on a transporter which im guessing is same as i seen the same alloys on a golf in Virginia at a dealer garage on Dublin road the other day ...??

no transporters nd passats are 5x112, still a long way away from 5x120 lol
Tomas_s13
09-08-11, 22:10
has to be magic then, ill sort anybody with as much beer as they can drink in one nite if they'll put my keskin KT1 stright from my bmw e28 onto my MB 190E!
any tryers? :D
RB26DETT
10-08-11, 22:40
has to be magic then, ill sort anybody with as much beer as they can drink in one nite if they'll put my keskin KT1 stright from my bmw e28 onto my MB 190E!
any tryers? :D

I bet I could do that :D






Will need plenty of duct tape though.................. and it may not actually rotate. ;) :p
hachi.roku
11-08-11, 01:19
The monoblock is 5x112? and the soarer is 5x114.3

Just needs wobble bolts surely
CarlCF4
11-08-11, 01:33
I think to answer the OP, no
Spartacus
11-08-11, 09:37
Stevie e39 drift is right in a way, the newer Transporters are 5x120 so yeah 5x120 wheels would have fitten it.

http://www.muamat.com/adpics/4d5cdd7613d9bbb91a297eeb2.jpg

MkV's and MkVI's and new Passat's/Jetta's etc are 5 x 112.

Monoblocks could fit to the Soarer using "wobble bolts" however i'd be fucked if I would ever use them on a RWD car that you'd be tearing around on. And the fact, unless they are the proper 2/3 piece monoblocks and they are just rep's they would look absolute wank.

http://www.serpentautosport.com/varibolt1web.jpg
babyeater690
04-09-11, 20:27
order a new set of a the supplier and get them to drill them 5x114.3 thats what tonto did on his type r with the lensos cost ye a few extra blips or just get pcd spacers and youd need a serious set of spacers anyway coz most wheels get lost in the soarers arches