View Full Version : will these fit 180sx?
Anyone know how these would sit on a 180sx
front 8.5j x18 offset +30
rear 9.0j x18 offset +40
Anyone know how these would sit on a 180sx
front 8.5j x18 offset +30
rear 9.0j x18 offset +40
You will prob need a 10mil spacer on standard arches or there abouts
You will prob need a 10mil spacer on standard arches or there abouts
cheers, I was gonna put overfenders on it too 30mm on rear 25mm on front
I've an idea now.Would I need big power to spin them
this do?
s15 bb turbo, 4in from turbo back, z32maf, 550cc's, 255 walbro, Apexi Power fc
Here's the plan;)
http://i1207.photobucket.com/albums/bb463/johnbro/1234.jpg
DO NOT FIT overfenders with that offset... you'll need 60-70mm spacers:eek:
drift student
07-03-11, 20:30
stevo speaks the truth.........
i wreckon you already need a 30mm spacer on a standard arch.
DO NOT FIT overfenders with that offset... you'll need 60-70mm spacers:eek:
the man speaks the truth, dont waste your time or money, it will look crap also.!!!
drift student
07-03-11, 20:33
ah overfenders are great for covering damage :)
Administrator
07-03-11, 20:38
DO NOT FIT overfenders with that offset... you'll need 60-70mm spacers:eek:
Quoted for the truth!
http://farm2.static.flickr.com/1100/4722943046_5d079158a8_b.jpg
That's a 17x9 ET -1 on front and a 17x9.5 ET 18 on back
Your wheels will sit about an inch and a half further in on the front and an inch further in on the back than my 180 above (standard arches with light roll)
ah overfenders are great for covering damage :)
That's why I want them;)
drift student
07-03-11, 20:42
thats it........ no way mine are +5 seein yours sit that way under yours darragh.
Anyone know how these would sit on a 180sx
front 8.5j x18 offset +30
rear 9.0j x18 offset +40
This is my 180 with 8j et10 (black one on the left)
http://i55.tinypic.com/11gkd1z.jpg
Administrator
07-03-11, 20:50
thats it........ no way mine are +5 seein yours sit that way under yours darragh.
Any proper side on pics of yours?
OP With 30mm wider front wings you'll need 60mm+ spacers to get them fitting something like this
http://farm2.static.flickr.com/1144/4722943068_37f32b7c44_b.jpg
I was running a decent bit of negative camber front and rear too
Thanks lads for comments.
Looks like repairing my quarter panels and having them rolled would be best
Would it be OK running 18's on a drift car
a lad wants to swap me
a set of rays te37's in that size
front 8.5j x18 offset +30
rear 9.0j x18 offset +40
I'm set on the idea of a yellow 180 with white te37's:D i think:rolleyes:
Administrator
07-03-11, 20:55
Thanks lads for comments.
Looks like repairing my quarter panels and having them rolled would be best
Would it be OK running 18's on a drift car
a lad wants to swap me
a set of rays te37's in that size
front 8.5j x18 offset +30
rear 9.0j x18 offset +40
I'm set on the idea of a yellow 180 with white te37's:D i think:rolleyes:
The high offset ones generally look pretty shit on S bodies!
http://www.nissansilvia.com/forums/uploads/monthly_02_2011/post-33424-12967743058364_thumb.jpg
No real concave on the spokes
Thanks lads for comments.
Looks like repairing my quarter panels and having them rolled would be best
Would it be OK running 18's on a drift car
a lad wants to swap me
a set of rays te37's in that size
front 8.5j x18 offset +30
rear 9.0j x18 offset +40
I'm set on the idea of a yellow 180 with white te37's:D i think:rolleyes:
haha shit offsets, there probably "RAVS INOVITS":p:p
Your wheels will sit about an inch and a half further in on the front and an inch further in on the back than my 180
Do you mean with overfenders yeah??
Would they fit the car with standard wings/quarters?
Administrator
07-03-11, 20:58
Do you mean with overfenders yeah??
Would they fit the car with standard wings/quarters?
They'll sit that much more in on standard arches going off my wheel specs and ghetto suspension setup
haha shit offsets, there probably "RAVS INOVITS":p:p
I thought that but, supposedly genuine???
a lad on here has them
http://www.driftireland.com/showthread.php?t=12421
http://cars.donedeal.ie/for-sale/carextras/1953637
Administrator
07-03-11, 21:07
They're standard 350Z wheels sprayed white apparently!
http://www.innerauto.com/includes/images/Inner_Auto/Nissan_Parts/Nissan_Parts/Nis_350z_Wheel.jpg
They're standard 350Z wheels sprayed white apparently!
http://www.innerauto.com/includes/images/Inner_Auto/Nissan_Parts/Nissan_Parts/Nis_350z_Wheel.jpg
hahahaha
:p
Tezzy-brian
07-03-11, 21:14
They're standard 350Z wheels sprayed white apparently!
http://www.innerauto.com/includes/images/Inner_Auto/Nissan_Parts/Nissan_Parts/Nis_350z_Wheel.jpg
As far as i know the wheels are genuine..the wheels will be off the car tomorrow so will know for definate..
He says he's only using 20mm spacers all round on that s14
Look like standard 350z wheels alright afaik
Worth swapping for these
http://www.driftireland.com/showthread.php?t=15926
I'd sooner use these if I'm gonna be left in the same situation with offsets and what not
As far as i know the wheels are genuine..the wheels will be off the car tomorrow so will know for definate..
350z wheels are genuine rays
Tezzy-brian
07-03-11, 21:19
350z wheels are genuine rays
I was told they were genuine Rays by the previous owner
Administrator
07-03-11, 21:19
350z wheels are genuine rays
Was gonna say that
They aren't TE37s though clearly and I wouldn't go near them as a swap for your wheels
Administrator
07-03-11, 21:19
I was told they were genuine Rays by the previous owner
That's probably why he said they were genuine Rays
Administrator
07-03-11, 21:20
He says he's only using 20mm spacers all round on that s14
Look like standard 350z wheels alright afaik
Worth swapping for these
http://www.driftireland.com/showthread.php?t=15926
I'd sooner use these if I'm gonna be left in the same situation with offsets and what not
And they still look to fit reaaaally badly.
Have you tried those SSRs on your car?
That's probably why he said they were genuine Rays
exactly as darragh said , genuine rays but there not TE37's...
Tezzy-brian
07-03-11, 21:28
exactly as darragh said , genuine rays but there not TE37's...
How would i know if there genuine te37s is it stamped on the inside of the rim?
Administrator
07-03-11, 21:31
How would i know if there genuine te37s is it stamped on the inside of the rim?
They would have to somewhat resemble TE37s firstly
http://i306.photobucket.com/albums/nn242/SIchodelic/Civic%20SI/For%20Sale/Volks006.jpg
And they still look to fit reaaaally badly.
Have you tried those SSRs on your car?
no man didn't fit them even, I kinda had my mind made up to sell them and put the money towards some nice dishes.
then get the rear quarters and wings, uras kit then a 326 power wing
then a shiny yellow paintjob:D
Tezzy-brian
07-03-11, 21:37
Well im no expert on wheels but im still not convinced because the majority of people that see my car always seem to think there TE37s and these would be people that would lnow alot about wheels..
Administrator
07-03-11, 21:39
Well im no expert on wheels but im still not convinced because the majority of people that see my car always seem to think there TE37s and these would be people that would lnow alot about wheels..
Errr... I vote they know fuck all. I've owned a set of genuine TE37s
Sorry Brian, I think my mind's made up on this:(
Best of luck with the sale anyway maybe throw them in parts for sale thread
Btw here's the real spec on your wheels;)
350z track v1's
Super-light Forged Aluminum Alloy
Front
Size: 18x8.0
Offset: +30mm
Weight: 18.19lbs
Rear
Size: 18x8.5
Offset: +33mm
Weight: 18.62lbs
Tezzy-brian
07-03-11, 21:43
Era shur maybe they do know fuck all..
nah defo not lad , they probably think they are when they see the stickers an maybe look somewhat similar with a glance from a distance..
no te37's have them little holes in the spokes , thats one sure sign..
where the spokes meet the rim are also a different design twards the ones posted..
Tezzy-brian
07-03-11, 21:48
nah defo not lad , they probably think they are when they see the stickers an maybe look somewhat similar with a glance from a distance..
no te37's have them little holes in the spokes , thats one sure sign..
where the spokes meet the rim are also a different design twards the ones posted..
No bother lad thanks for the info..Wat kinda money do those 350z wheels go for??Must change ny done deal add now lol
No bother lad thanks for the info..Wat kinda money do those 350z wheels go for??Must change ny done deal add now lol
dont know really to be honest , darragh an the lads mite be able to give u a guide price..
there not shit wheels either lad , we'r only pointing out that they are not te37 is all ;) . still a good quality strong wheel. glws ;)
Tezzy-brian
07-03-11, 23:47
Ya no problem drifter thanks for the info drifter..I think ill put them up for €350 cos there mint..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.