View Full Version : New S2000 Drift Car Build!
Right about time I got this thread up, I bought this S2000 a little while back with some rear damage and with no engine, box or loom. Meself and John (the bro) decided that this was the car to build into a proper fast drift car even tho the setup could take a while, and it will be different:D
So the plans for the car at the min are.....
Forged F20c with linered block for the boost
Full-race exhaust manifold depending on funds
In around Gt30/35r size blower with custom housings
E46 M3 6 speed box
GTR Skyline rear diff and custom shafts
Suspension I haven't decided on yet
MoTeC M84 ECU with launch controll, anti lag, lambda controll
Pedal box
Full custom TDP T45 roll cage
Evo 7 Brembo 4pot front Brembo 2pot rear with custom TDP bells and disc's
Parts I have aquired,,,,,,
F20c engine:D
GTR diff and shafts
Brembo front calipers
Pedal box,,,,,
That is the basic outline of the setup but the main difference of this build is the time I am spending on the chassis, every un-necessary kg is coming out of the car as you will see from the pics:D
Anyway I will explain everything in detail as I get through the build,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1312.jpg
The car had to go to the body shop first because the back chassis needed a little pull:eek:
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1311.jpg
And this is how it came back,,,, The stripping started,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1314.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1315.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1316.jpg
All the basic stripping done,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1325.jpg
Front subframe out,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1326.jpg
Rear subframe out,
This is where the weight saving starts:cool: There is alot of excess chassis bracing in the S2000 due to having no roof, so all of it has to go:) The new cage will do all the bracings job and better,,, and away we go on the spot welds:mad:
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1327.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1328.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1329.jpg
Alot of the underneath strenghtning can go too,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1330.jpg
Time to get the sills off, a whole lot of not nice heavy side impact protection in behind them that needs to go,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1332.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1333.jpg
After a whole shit load of spot welds, finally got one side done and set into the other side,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1334.jpg
Thats all the pics for this week will have more at the weekend I hope, it takes so much time removing chassis parts because of the spot welds il keep you all updated as much as possible!
Christs there is no car left hahha... quality.. ill be keeping a good eye on this.. nice to see something different..
Robbie Daly Ps13
23-01-11, 16:35
Your a nutjob........! Gonna be some yoke....!
fuck brendan no messing with you that some array of parts ha ha bmw, mitsi,nissan and all in a honda
skinnynphats200
23-01-11, 16:39
Subscribed, should be savage build. Good luck with it. Will be watching closely
fuck brendan no messing with you that some array of parts ha ha bmw, mitsi,nissan and all in a honda
Ha ha yea, use the best bits of all of them:-)
chrisbrady325
23-01-11, 16:47
class job, will be good to see you pilot her!!
180sxbreaker
23-01-11, 18:03
defo goin to keep a close eye on this i love wen someone use's there imagination and decides to build summit very different and very interesting
AAAHHHHHHH S2000 DRIFT CAR......
p.s. i love you
looking forward to seeing how this one turns out.
best of luck with it
some undertakin lad!!! love the combo of parts...
Jus FYI you may know already the e36 m3 5 speed is stronger than the e46 m3 6 speed.
Fergal blew 3rd gear in da manta e46 6 speed box while he had it,and now she is the e36
Besta luck
some undertakin lad!!! love the combo of parts...
Jus FYI you may know already the e36 m3 5 speed is stronger than the e46 m3 6 speed.
Fergal blew 3rd gear in da manta e46 6 speed box while he had it,and now she is the e36
Besta luck
Is the 5spd stronger though? Aren't they the same as a 328i box?? The few weeks i had my '28 the box started to get notchy.. Also John Mac in his PD M3 has broken a few of em... I would have thought the E46 box be the job... But an E39 M5 box be the right job wouldn't it??
Some project Brendan, Gonna be savage :cool:
cant wait too see this finished stoni,shes gonna be savage
Is the 5spd stronger though? Aren't they the same as a 328i box?? The few weeks i had my '28 the box started to get notchy.. Also John Mac in his PD M3 has broken a few of em... I would have thought the E46 box be the job... But an E39 M5 box be the right job wouldn't it??
Some project Brendan, Gonna be savage :cool:
E46 m3 box is the same as the m5 box as far as I'm told,,,,,, I talked to J.P mc about the different boxes and it was him recommended the 46 m3 box so maybe il do a little more research, thanks for the input lads:D
E46 m3 box is the same as the m5 box as far as I'm told,,,,,, I talked to J.P mc about the different boxes and it was him recommended the 46 m3 box so maybe il do a little more research, thanks for the input lads:D
Ah so there both Getreg boxes is it? John Hickey likes this.
Ah so there both Getreg boxes is it? John Hickey likes this.
They sure are ted, and I'd rather a getrac over a ZF box any day,, that's who does the 5 speed m3 box!!
They sure are ted, and I'd rather a getrac over a ZF box any day,, that's who does the 5 speed m3 box!!
I know yea! Like i said same as 328 box as well..And i put one of them boxes on its last legs after a few wks of road skids..
Man spec boxes FTW!!! And fannys :D
I know yea! Like i said same as 328 box as well..And i put one of them boxes on its last legs after a few wks of road skids..
Man spec boxes FTW!!! And fannys :D
I concur,,,,,
I concur,,,,,
Yes!! Down with that sort of thing!
Anyway, have fun lad!
Yes!! Down with that sort of thing!
Anyway, have fun lad!
Will do thanks ted,,
this will be interesting
http://img148.imageshack.us/img148/3020/235374931834bdccbcfb.jpg (http://img148.imageshack.us/i/235374931834bdccbcfb.jpg/)
this car is gona b so light and grippy grippy
best of luck with the build lad...cant wait to see it finished will sure be interesting nice to to keep it honda engined
babyeater690
23-01-11, 21:13
nice build lad best of luck:D
Thanks lads, there is alot of work going into this one it will be good:D
much more gone from her now lad??
much more gone from her now lad??
Havn't got near it that much since, other sill is off and the side impact shit is gone so got a bit done,,,, hope to get a shit load done this week,, may get more drill bits:D
If theres anyone thats gona make this work its yous group of crazy scientists :D
No doubt its going to be nothing short of epic and highly competative!! best of luck with the remainder of the build stonie.
If theres anyone thats gona make this work its yous group of crazy scientists :D
No doubt its going to be nothing short of epic and highly competative!! best of luck with the remainder of the build stonie.
Thanks micko, I hope it will be competitive or it will be a very big waste of money,,, ha ha
This is going to be epic can't wait to see it all finished and out on a track. Hope everything goes to plan, best of luck!
Aidan Hogan
23-01-11, 23:21
Wow :eek:
This is gonna be a class build and I can NOT wait to see it done.
Updates will be different from the norm too so tats a bonus :cool:
Cool build great to see something different going on,best of luck with it
best of luck with this build brendan,,should be epic!!
Thanks for all the comments lads,,:cool:
as said before its nice to see something different.. cant wait to see how it goes..
best of luck with it lad :cool:
WOW! crazy stuff! Nice choice of parts, will defiantly be different and very cool!
thats fuckin goin to be class
holy shit this s some build.. not much car left afer all the weight removal..
holy shit this s some build.. not much car left afer all the weight removal..
Iv only started,,,,:D
best of luck with it anyway gonna be mental..
this is going to be a savage build
its coming alog class, lad top work as usuall. is there any chance i can get a close up look or is it going to be kept for the launch..
its coming alog class, lad top work as usuall. is there any chance i can get a close up look or is it going to be kept for the launch..
Ah no probs, no secrets about the car:-) the only thing is ya might not think it will go back together if you see it:-)
s2000 pfffffttttt that wont work ,they dont drift what ya playn at
bahahahahahahah :D :D :D :D besta luck man will be a good one
sweet build lad ,nice to see something different :)
Back at this in the morning!
Back at this in the morning!
i may even spin over to see it if i gots the time ! :)
i may even spin over to see it if i gots the time ! :)
No bother give me a ring,, 085-1509973
No bother give me a ring,, 085-1509973
cool cool :)
Right lads, only got back at this today had a busy week,,,
I have since sorted a loan of a oem Honda hard-top so i can get a fiberglass copy made, this is going to save me alot of money towards buying a oem or after market hard top:D
I also sorted a E36 M3 6speed getrac gearbox today:D couldnt find an E46 one for decent money so going to pick this up during the week,,,,
Right back to getting rid of evil weight:p I started into the drivers side sill today to get rid of all the side impact protection and some other stuff,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1358.jpg
This is how it looked starting this morning,,,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1360.jpg
this is after a few 1mm grinder disc's and a shit load of spot welds,,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1361.jpg
Here is some more chassis strenghtning that wont be needed and is quite heavy material,,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1362.jpg
And its gone,,:eek: pain in the arse getting this part off both sides...
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1363.jpg
And finally for today I had the bar for mounting the radiator and a big heavy piece of multi layer box section between the chassis legs,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1364.jpg
So got rid of them and will replace them with light roll cage tubing,,
Took 40kg's out of the car today,,
And I am looking into getting all fiberglass panels, doors, boot door, quarter panel's the lot but will know more next week;)
Thats it for today, should have all the chassis lightening done by next weekend and will be getting it up to TDP for its custom roll-cage:D
Il update again next weekend,,,,,,,,,,;)
This is gona be mental light ,trust me on this one lads itl be some car ,the blood and sweat literally gone into the prep is outsatnding ,weight saving alone is ridicolous yet compensated in the correct places with the cage and bracing .........................
Also wana take the chance to thank brendan for being a gent and takin his time to look after me today down the garage ,top bloke . :)
This is gona be mental light ,trust me on this one lads itl be some car ,the blood and sweat literally gone into the prep is outsatnding ,weight saving alone is ridicolous yet compensated in the correct places with the cage and bracing .........................
Also wana take the chance to thank brendan for being a gent and takin his time to look after me today down the garage ,top bloke . :)
Thanks Chris, your welcome to call anytime only bring the work clothes next time and I make use of ya,,,:D
ian g sr20
30-01-11, 23:24
this is a serious build u putting together lad best of luck with it..
sweet build best of luck :)
DaveM-sport
31-01-11, 10:57
Is the 5spd stronger though? Aren't they the same as a 328i box?? The few weeks i had my '28 the box started to get notchy.. Also John Mac in his PD M3 has broken a few of em... I would have thought the E46 box be the job... But an E39 M5 box be the right job wouldn't it??
Some project Brendan, Gonna be savage :cool:
E46 M3 and E39 M5 6 speed manuals are the same gearbox apart from having different bellhousings (which are interchangable anyway(
E36 328 and 3L M3 gearbox are the same but they are ZF and much tougher than the Getrag 6 speed E36 M3 Evo gearbox. John made bits of his Evo box
The E46/E39 Getrag 6 speed is a lot stronger than the E36 one as it has bigger shafts and stronger bearings but I'm not sure if its really worth it considering they are expensive and if you break it, your screwed whereas E36 5 speed boxes are plentiful and can be picked up for 150 quid or so.
I have an E46 M3 gearbox in my E30 318iS but its only a roadcar.
Also the fact that clutches are much easier to get for the E36 boxes as the splines are abit of a prick to get a clutch to suit on the E46 or E39 M5 boxes.
Your going to make bits of the layshafts and synchros on the E36 box to be honest as they aren't upto alot of abuse... but then again, the F20 won't have as much torque and its a realtively light car.
Going to be a sweet car once done! :)
E46 M3 and E39 M5 6 speed manuals are the same gearbox apart from having different bellhousings (which are interchangable anyway(
E36 328 and 3L M3 gearbox are the same but they are ZF and much tougher than the Getrag 6 speed E36 M3 Evo gearbox. John made bits of his Evo box
The E46/E39 Getrag 6 speed is a lot stronger than the E36 one as it has bigger shafts and stronger bearings but I'm not sure if its really worth it considering they are expensive and if you break it, your screwed whereas E36 5 speed boxes are plentiful and can be picked up for 150 quid or so.
I have an E46 M3 gearbox in my E30 318iS but its only a roadcar.
Also the fact that clutches are much easier to get for the E36 boxes as the splines are abit of a prick to get a clutch to suit on the E46 or E39 M5 boxes.
Your going to make bits of the layshafts and synchros on the E36 box to be honest as they aren't upto alot of abuse... but then again, the F20 won't have as much torque and its a realtively light car.
Going to be a sweet car once done! :)
Yea I talked to j.p about boxes alright he was saying he broke 1 or 2 6speeds alright but he said he gave them awfull abuse:D I know meself I will prob break the 36 box but at least if I make an adapter plate I can get a 46 box afterwards and bang it in:D
It will have not so much torque but more power and revs which will help but it's really wait and see, if I have trouble il get a 46 box,,,
Thanks for the info tho,,,,
DaveM-sport
31-01-11, 15:33
E46 box won't go straight in as the clutches are different. Everything else is the same though.
Also, unless you plan on using 6th gear, the 6 speed box will make no difference whatsoever as 1st-5th is the same in both E36 3L M3 and 3.2 Evo. The E46 has very slightly different gearing then for 1st and 6th but it's only the difference of +/- 0.05 or so in ratios.
Personally I'd go with the 5 speeds as they at easy to replace. If you break the 6 speed your stuck with trying to find a replacement E36 6 speed at a cost of 300 quid at the very least and I have seen E46 boxes go or 700-1000 unless your lucky. I bought an engine and box together to make mine valu go money :p
Then I you do break the 6 speed and can't find one youll be having to redo the prop, gear-linkages an mountings for a 5 speed if your running out of time for an event etc.
John broke the original Evo box in the M3, I used it in my iS for test fitting before I bought a good one after he took it out and put in the 5 speed to the M3.
He broke 3rd in a 5 speed as well though but that gearbox might not have been great to start with and he was doing 3rd gear rings :D
That's justy opinion of it anyway. I'm shut you know what you are at anyway an it'll turn out well either way :)
Just seen this build on DI's facebook.
Wow:eek: Can't wait to see this thing go:cool:
Serious work lads keep it up:D
Nice build man be nice to see somthing different
On the scene, my only input on the gearbox is Jp
Is speaking from experience and that means way
More than specs on paper if he says use that box
Use it he wouldn't of told ya for no reason. Keep
Up the good work to and keep the updates coming!!!
Nice build man be nice to see somthing different
On the scene, my only input on the gearbox is Jp
Is speaking from experience and that means way
More than specs on paper if he says use that box
Use it he wouldn't of told ya for no reason. Keep
Up the good work to and keep the updates coming!!!
Thanks dude, I will do,,,,,
nice build nice 2 see a s2000 bein done somethin different and not ur usual datsun haha keep up da good work lad
B&G Extreme Drifting
01-02-11, 21:22
PROJECT MENTAL!!!!!
best of luck brendan some wrk, some build, some car!!!!!!!!!
wel different keep up da gud wrk
well ted,some work you have ahead of you there ha,best of luck;)
PROJECT MENTAL!!!!!
best of luck brendan some wrk, some build, some car!!!!!!!!!
wel different keep up da gud wrk
Thank ted, hopefully it will be good,,,:p
well ted,some work you have ahead of you there ha,best of luck;)
Ha ha don't talk to me!!!!! Should be good tho,,,,:D
I weighed the shell as it sits, finally fully stripped a few mins ago and it weigh's 150kg's:D I'm nearly as heavy:mad:
Delighted iv got it down to this weight, so now it's time to get her up on the spit and do the small bit of underneath seam welding I want to do and get it all nice and clean for paint:cool:
Hope to get it on the spit tomorro nite and all going to plan it will be ready to make it's way to work (TDP workshop) for it's cage which will be fairly cool,, :cool:
Will get pics up at the weekend of the weeks fun,,,!!!
Big lad in a small car :)
http://i286.photobucket.com/albums/ll109/jstoneracing/8dfe3728.jpg
Me and Brendan holding it up, it's fairly light cause we're not very strong ;)
http://i286.photobucket.com/albums/ll109/jstoneracing/01db6bc9.jpg
Another quick update, got the car up on the spit over the weekend and started getting the sealer shit off the bottom for some seam welding,,,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1375.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1367.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1368.jpg
after starting stripping the horrid sealer,,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1376.jpg
Wire brush on the 9 inch grinder is the only job:D
Will be seam welding by the weekend will get pics up soon as I can, here is few bits Iv picked up so far,,,,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1369.jpg
R32 GTR diff and have shafts too, we have decided to go with GTR rear hubs aswell and will be replacing the standard subframe with a custom tube one, and custom rose jointed adjustable arm's.
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1372.jpg
Motordrive custom made to fit seat:cool:
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1373.jpg
Completely made from carbon kevlar for the light weight,,
http://i286.photobucket.com/albums/ll109/jstoneracing/103_1374.jpg
And some forged H section towing eyes,,,,,,:D
More to come soon,,
iv the same motodrive seat as that here if you looking for a passo one they are a savage job!! unreal light and comfy even for us big fookers!
iv the same motodrive seat as that here if you looking for a passo one they are a savage job!! unreal light and comfy even for us big fookers!
Much??????
ill have to think about it and take it outta the stack of seats i have just to make sure its the same one but im 99.9% sure it is
ill have to think about it and take it outta the stack of seats i have just to make sure its the same one but im 99.9% sure it is
Let me know,,,,
Robbie Daly Ps13
07-02-11, 23:53
ill have to think about it and take it outta the stack of seats i have just to make sure its the same one but im 99.9% sure it is
Any other nice seats in that seat stack....! Remember im small boned not like u fuckers..... :D
Any other nice seats in that seat stack....! Remember im small boned not like u fuckers..... :D
haha u want a pair or just seats??
200sx-slider
07-02-11, 23:57
if your selling off your seats i like to know what you have
sorry for the hijack
Robbie Daly Ps13
07-02-11, 23:57
haha u want a pair or just seats??
What ya got...! I don't want shite...! Go on facebook till we stop spamming poor Brendans thread...!
http://i581.photobucket.com/albums/ss256/gem-s13/wheelsale052.jpg
http://i581.photobucket.com/albums/ss256/gem-s13/wheelsale053.jpg
there she is slightly diffrant,
ye robbie on fb
@200 pm me what your looking for
http://i581.photobucket.com/albums/ss256/gem-s13/wheelsale052.jpg
http://i581.photobucket.com/albums/ss256/gem-s13/wheelsale053.jpg
there she is slightly diffrant,
ye robbie on fb
@200 pm me what your looking for
Is that one blue?
pauljosephfurey
08-02-11, 17:28
impressive build lad. ill be keepin tuned in for this one
really is a class build.. what weight will ya be hoping to have this thing???
really is a class build.. what weight will ya be hoping to have this thing???
850-900kg we hope:D
850-900kg we hope:D
looks like you've to loose 50kg so :p:p
cant wait to see finish ted.....
gonna be savage..
who's mapping it for you??? :p:p:p
looks like you've to loose 50kg so :p:p
cant wait to see finish ted.....
gonna be savage..
who's mapping it for you??? :p:p:p
couture is mappn it ,so he tells me anyway :D
Was out all evening cleaning sealer off the under floor,, what a cu#t of a job!
Have well over half cleaned off now and my arms are hanging off from the 9" grinder:o
http://i1114.photobucket.com/albums/k540/Stonie3/d2e9c15f.jpg
Going to clean every spec of sealer off to get a nice shiney clean spray job underneath,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/6efad7a0.jpg
looks like you've to loose 50kg so :p:p
cant wait to see finish ted.....
gonna be savage..
who's mapping it for you??? :p:p:p
You callin me fat??? Ha ha ha
Not sure who il get yet, any suggestions??:D
i feel your pain with the sealer,,what a soul destroying job,,as you know,,
makes all the difference for welding so well worth having it immaculate:):)
i feel your pain with the sealer,,what a soul destroying job,,as you know,,
makes all the difference for welding so well worth having it immaculate:):)
Oh I know,,,, it's awfull shit to get off, and you never ever get it all no matter how hard you try,,,,,!!!!!
Oh I know,,,, it's awfull shit to get off, and you never ever get it all no matter how hard you try,,,,,!!!!!
nitromorse!!! only job paint it on leave it over nite give itanother lash leave for an hour hand wire brush sealer will fall off! only job:D:D
nitromorse!!! only job paint it on leave it over nite give itanother lash leave for an hour hand wire brush sealer will fall off! only job:D:D
x2 have done the same and some serious results:):)
nitromorse!!! only job paint it on leave it over nite give itanother lash leave for an hour hand wire brush sealer will fall off! only job:D:D
Nitro won't lift this shit lad, first thing I tried usually works a treat but won't lift this for some reason,,,,,,,
Nitro won't lift this shit lad, first thing I tried usually works a treat but won't lift this for some reason,,,,,,,
update on the other dirty ting ?? :D
update on the other dirty ting ?? :D
Ya would want nitromorse on her,,, ha ha ha
Ya would want nitromorse on her,,, ha ha ha
fuckn power washer :D
with nitromors in it :D :D
fuckn power washer :D
with nitromors in it :D :D
Duurrty,,,,
Hey spam much,,??
Duurrty,,,,
Hey spam much,,??
all the time ya know me :D
emmmmmm great build lad ??????,ha peace out dude lookn well :)
Robbie Daly Ps13
09-02-11, 23:35
Nitro won't lift this shit lad, first thing I tried usually works a treat but won't lift this for some reason,,,,,,,
Whick colour tub nitromorse u use....! The yellow 1 is way better than then green...!
Whick colour tub nitromorse u use....! The yellow 1 is way better than then green...!
Never seen yellow,,,:confused: good stuff??
chrisbrady325
10-02-11, 10:42
Thinners... brush it on good and heavy let it soak in and then keep brushing it and it should come off easy enough.. i've done a few car like that now, its messy and you'd prob use a gallon of thinners, but sure its cheap stuff,
Robbie Daly Ps13
10-02-11, 18:06
Never seen yellow,,,:confused: good stuff??
Yep kinda yellow/brown tin....! Its actually for using on timber and that but it works serious on the cars...!
Ive used a plumbers turbo torch to burn the sealer off and while it's still hot put the grinder too it afterwards..works a treat and much faster.Savage build by the way can't wait to see this finished.
Quick update,,,,
Got all the sealer off in the end (what a job) and started into the seam welding,,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/7ab27d27.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/e24b62fb.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/bab761f4.jpg
After a shit load of cleaning joints and welding I finally got the seam welding finished today,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/32b7a32f.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/d0590df0.jpg
I got my 6 speed GETRAC M3 box this week too,,
http://i1114.photobucket.com/albums/k540/Stonie3/196dbf63.jpg
I got my FD RX7 steering rack aswell,,
I also got 2 GTR rear hubs off 200sx on here and we decided to put a GTR rear subframe in the car to make it all just bolt in, so if anything ever gets damaged, original GTR parts will bolt straight in and it's strong as fook:D
By the end of this week the shell will be ready to make it's way to work (TDP) for it's quite special custom roll cage...... I will update again soon as I can...............:cool:
you gotta love the sealer:D nice welds, nice parts also, lookin forward to seein the cage
Jay Rockett
20-02-11, 11:44
4:50 in the morning, haha ya looper! Looking forward to seeing how the cage turns out. :cool:
You Stones are some fellas to put cars on a diet!
Looks some job!
Best of luck!
4:50 in the morning, haha ya looper! Looking forward to seeing how the cage turns out. :cool:
Ha ha I was bored:D photobucket app for the ol iPhone is the job:cool:
You Stones are some fellas to put cars on a diet!
Looks some job!
Best of luck!
Thanks lad,
Ha ha I was bored:D photobucket app for the ol iPhone is the job:cool:
yea right !! droppin newbridge home id say more like it :D
get the finger out first round is not far away ha ha
get the finger out first round is not far away ha ha
Waiting on this fuckin lotto to come through,,,,,,,,,,
Waiting on this fuckin lotto to come through,,,,,,,,,,
Like the rest of us :p
its not perfect but you get the idea of the color :D
http://i286.photobucket.com/albums/ll109/jstoneracing/s2000.jpg
its not perfect but you get the idea of the color :D
http://i286.photobucket.com/albums/ll109/jstoneracing/s2000.jpg
Now put this,,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/42323f2c.jpg
And these on it,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/cec990d4.jpg
sexy red :)
i did the s2000 on photoshop but heres an actual car with near enough the right color!
http://farm3.static.flickr.com/2583/3808336760_279e599015_o.jpg
sexy matte red :D
Satin red to be correct,,,,,,:cool:
Satin red to be correct,,,,,,:cool:
oh well excuse me :)
edit sounds better too sexy satin red
Now put this,,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/42323f2c.jpg
And these on it,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/cec990d4.jpg
No I'm of too bed :)
No I'm of too bed :)
i see the comedy runs in the family lol
ye may join our team brendan were all goin red,we ll sponsor ye the paint:D
Robbie Daly Ps13
21-02-11, 19:19
Not another red car...! Oh no.....!
Not another red car...! Oh no.....!
Not red excuse me,,,,,, satin red,,,:D
sounds better too sexy satin red
as said before sexy satin red!!
sexy satin red!!:cool:
here pal ya can get arrested for robbin these days :rolleyes: :D
here pal ya can get arrested for robbin these days :rolleyes: :D
^^^ fixeded
my apologies :o i knew i heard it somewhere :p
^^^ fixeded
my apologies :o i knew i heard it somewhere :p
ahh im only messin man :D
http://www.drifted.com/damien-oconnor/build-brendan-stones-rb25-s2000/6468/
This is part one of the Drifted blog on my build,
Cheers to Damo (DOC photography)
thats a nice build keep it up
state of this thing wheres its wheels and engine ????
xx
Great job lad...
Cheers dude,,
stack-180sx
09-03-11, 00:45
savage build lad one question why is there a piece missing out of the floor ??:confused:
mick-skyline
09-03-11, 00:59
Ya fooking arse, I said from day 1 there was an rb going into that and all along you said there wasn't. Glad to see you saw sence :p
Any ideas when youll have it together??
savage build lad one question why is there a piece missing out of the floor ??:confused:
There was a slight little tunnel under where the seat goes for the cat and exhaust and me bein a long fooker, I want the seat as low as possible!!
Ya fooking arse, I said from day 1 there was an rb going into that and all along you said there wasn't. Glad to see you saw sence :p
Any ideas when youll have it together??
Shup you,,,!!!:D this change in engine plan was not expected, a car came up cheap and I couldn let it go,, the cost difference is huge towards doing the f20 properly!!
I don't know when il have it done to be honest, soon as I can,!! But this new running gear will speed things up alot,,,,,:D
this is gona be a monster,, cant wait to see ya out in it
Unreal job Brendan, serious build ;) Will be cool to see an S2000 out there, especially done to this level
stack-180sx
09-03-11, 23:55
There was a slight little tunnel under where the seat goes for the cat and exhaust and me bein a long fooker, I want the seat as low as possible!!
o right like the Sbody has on the passanger side it all makes sence now :rolleyes:
Any worries about twisting the chassis with the 6 cylinder? A few companies in the US tried 2jz conversions and ended up warping chassis.
Any worries about twisting the chassis with the 6 cylinder? A few companies in the US tried 2jz conversions and ended up warping chassis.
With the amount of seam welding iv done and the spec of the cage that is going into it, I don't think I should have a problem like that at all,,, there will be alot of bars in it when it's finished:-)
Unreal job Brendan, serious build ;) Will be cool to see an S2000 out there, especially done to this level
Cheers mike;-) same to you,, fc's are cool as fook, you are alot further along than me tho I may try catch up,,,, bah ha ha as if!!!:-)
it wil be like a over done jungle gym the u see in a childs playground it will have that many bars:D
it wil be like a over done jungle gym the u see in a childs playground it will have that many bars:D
I still have ta fit in somewhere tho,,,, :p
ha ha we can get u one of the mushroom seats from the kids corner at macdonals to fint in with the playground theme
ha ha we can get u one of the mushroom seats from the kids corner at macdonals to fint in with the playground theme
And two ratchet straps to keep me tied to it,,,:D
oh fuck sake the worst tng is i can picture u in it:D realy cant wait to see u out in this
mushroom and all
oh fuck sake the worst tng is i can picture u in it:D realy cant wait to see u out in this
mushroom and all
Out of all the yokes iv driven (and iv driven a few fair yokes) I am lookin forward to this so much more, I can't wait for the first shakedown!! Got the car with the new donor engine off the trailer earlier and started to strip it, engine and box be out tomorro nite ready for measuring and should have the skyline rear subframe fitted in the car this week and get it back on it's wheels cos the tubing for the cage came in today:D:D:D
ah lad thats the job,, id say ur like a child at christmas
ah lad thats the job,, id say ur like a child at christmas
Waiting for christmass;)
ill drop up one the nite for a nosey
ill drop up one the nite for a nosey
No bother anytime,,,,,
cage has been started so should have pics later in the week :D
Ok, a little update at long last, after a hectic week in work last week we didn't get near this but got straight onto it thisevening,,, John has a fairly savage cage design drawn up for the car as it's not easy make an S2000 fully caged easy to get a big 6' 5" fucker like me into it:D so il put up detailed pics of the whole cage build as it will be quite special,,,
So first off John dropped four tubes down in the rear chassis legs right over the four subframe mounting bolts, this makes the rear chassis super strong as alot of torque will be travelling through the rear subframe:D
http://i1114.photobucket.com/albums/k540/Stonie3/0dd39b4b.jpg
Each tube is dropped down inside the chassis leg and welded off on top of the subframe bolts,,
http://i1114.photobucket.com/albums/k540/Stonie3/f32fa059.jpg
Then it was onto the bases for the main hoop, these need to be proper strong as I intend to use the car for the odd hill climb and sprint swell so safety is essential, this is the base plate,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/44de0ab9.jpg
Not alone is the car getting the normal plate welded to a strong chassis point, like here,
http://i1114.photobucket.com/albums/k540/Stonie3/e4d78874.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/a7b96356.jpg
But it has a tube welded to the top plate and then dropped down through two more pieces of chassis and welded off,, this makes it super strong!!
http://i1114.photobucket.com/albums/k540/Stonie3/3585d74b.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/b20f7565.jpg
We got the main hoop mounted up and welded off in place,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/72cf5fec.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/dbba7116.jpg
To get the seat low enough the original exhaust tunnel had to go, so a nice folded plate went in instead,,
http://i1114.photobucket.com/albums/k540/Stonie3/a712fedc.jpg
Will keep updates all through the cage build,,,
Looking very well. I'm looking forward to seeing what way you do it.
speedy200sx
28-03-11, 22:41
nice job lad comin along nicely:D
Savage job!.......should be no bother getting welds around the top of that cage!.....:D:D:D
Some serious time and work going into this........u should hope to see round 3, 2012 :)
Some serious time and work going into this........u should hope to see round 3, 2012 :)
Shup you:p yad be surprised how quick it will come together once the cage is in,,,
Some great fabricating right therrr
great work lads
Shup you:p yad be surprised how quick it will come together once the cage is in,,,
Aye, i believe ya......some savage work done in fairness, kinda crazy in a kool way. Looking forward to seeing it finished :)
Have you it finished yet :p
Are you gonna sell me them Volks??? :D
Savage build lad. The words go like shit off a shovel. Spring 2 mind.... ;)
Seen this today, detail and accuracy going into it is immense!
DaveM-sport
30-03-11, 23:34
Coming along nicely!!!
Very nice fabrication work, having no roof to contend with is a big help at the early stages :D
Coming along nicely!!!
Very nice fabrication work, having no roof to contend with is a big help at the early stages :D
Hows your build coming along havent seen many updates on the thread
Cheers for the comments lads:D
Another brief update, il try to put as many pics of the fabrication work up as I can to give a rough idea of the time and work going into this car,,,,
Trying to get an hour in the mornings before work and an hour or two in the evenings is all we can manage at the minute as we are flat out busy down in TDP, so that will explain why the cage is taking a little longer than usual,,
http://i1114.photobucket.com/albums/k540/Stonie3/6ae44585.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/d03277ae.jpg
A pillar bars in, they were quite difficult to make, John was thinking for a while on these,,
http://i1114.photobucket.com/albums/k540/Stonie3/976eae40.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/3f72b5fb.jpg
The A pillar bar goes through the sill and connects onto the bottom side impact protection sill bar which is also connected to the bottom of the main hoop,,
http://i1114.photobucket.com/albums/k540/Stonie3/230c0bdd.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/e02cfb3c.jpg
This is as far as John got this evening, very happy with progress so far and still looks like I mite fit in:D
http://i1114.photobucket.com/albums/k540/Stonie3/62be9c19.jpg
I also picked up this little GT35r,:cool:
Stay tuned as the cage will start to get interesting fairly soon,,,,,
serious cage in it so far man
Martin ffrench
31-03-11, 23:17
savage so wheb you fitting the 530d engine
DaveM-sport
31-03-11, 23:42
When is it planned to be finished by or is it too early to tell?
Hows your build coming along havent seen many updates on the thread
Final year in college, working on other peoples cars and work at home has kinda fooked up things in terms of time and funds :o
Would have had it almost done this year as wasn't planning on going back for another year at first but may as well when I had the chance.
Over the summer and next Autumn, I'll be making a good stab at it though.
savage so wheb you fitting the 530d engine
Some torque monster then :D
When is it planned to be finished by or is it too early to tell?
Final year in college, working on other peoples cars and work at home has kinda fooked up things in terms of time and funds :o
Would have had it almost done this year as wasn't planning on going back for another year at first but may as well when I had the chance.
Over the summer and next Autumn, I'll be making a good stab at it though.
Not sure yet lad, within the next couple a months,,, I hope:D
Another few pics of the cage progress,,
http://i1114.photobucket.com/albums/k540/Stonie3/5c291458.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/b262bc81.jpg
Because I'm such a big fucker, John came up with this really cool plan for the door bars which are NASCAR style to improve access into the car,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/fa6aeeee.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/0f7be60d.jpg
The top door bar will now run out into the door to give more space in the cockpit,,,
http://i1114.photobucket.com/albums/k540/Stonie3/6e353898.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/dc52cff4.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/1cea6fa7.jpg
And the sill sat back on shows the only bars that will be seen,,,,
More soon,,,,,,:D
good wrk lads :P
surely deserve a pint 2ni so ;)
good wrk lads :P
surely deserve a pint 2ni so ;)
I'd say your right:D
See ya in there,, giz a txt,,
Ok the cage is now finished:D:D:D
John put in a hell of a lot of work today and got it finished, and what a job he has done,,,,,
http://i1114.photobucket.com/albums/k540/Stonie3/f3eea34e.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/ee83f931.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/0b85fee5.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/1dc76c80.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/6606f591.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/ac075140.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/3068bf93.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/93e4a68e.jpg
Big thanks to John for putting this car into a different league, and thanks to Robbie for letting me borrow John to get my car done since we are so busy with cage work,, TDP are now definatly #1 for roll cages!!!
Now to get the GTR rear subframe in and start getting some panels back on,,,
just shows you what a good team does and can be done :D
joey banana s14
11-04-11, 20:53
serious build cant wait to see this finished one of
irelands most unique builds
Looks cool as fuck lad...fairplay
stack-180sx
11-04-11, 21:31
for the love of fuck my sideways that cage is just serious lad :eek:
for the love of fuck my sideways that cage is just serious lad :eek:
x2 savage work altogether :eek: how long did the cage take in total?
x2 savage work altogether :eek: how long did the cage take in total?
Not exactly sure cos we were trying to get an hour here and there trying to work around customer work,, but John would do it in a week if he got full days at it, alot of work in it,,,,
wow ! some smashn angles there
Thanks lads :)
Have a few more cool Little bits to add before it's finished!
Goin to be an early one tomorrow :(
Prodrifter86
11-04-11, 22:42
holy shit thats sum fabbing.... savage work...
Just lettin yas know,,, this is now getting an RB26......:cool:
Shit the bed thats some fuckin cage! :eek:
Just lettin yas know,,, this is now getting an RB26......:cool:
and now I have a pants mountain
DaveM-sport
20-04-11, 13:02
Just lettin yas know,,, this is now getting an RB26......:cool:
You'll hardly have room to sit in it soon with all the cage and engine and box beside you :D
Robbie Daly Ps13
20-04-11, 13:04
Just lettin yas know,,, this is now getting an RB26......:cool:
Just to be cool like..... :cool:
pole drift
20-04-11, 13:22
Do you still expect to have this done for round 3?
Do you still expect to have this done for round 3?
Yep:D,,,,,
pole drift
20-04-11, 13:31
good lad :D:D:D you gonna sit your balls on the dash too??
S14a johno
20-04-11, 13:39
NICE WORK OUT YA :D:D:D
ya in stonies sunday :rolleyes::rolleyes::rolleyes::rolleyes:
i say breaden be on the roof doing a mr bean job when that rb goes in :D
B&G Extreme Drifting
20-04-11, 13:52
Just lettin yas know,,, this is now getting an RB26......:cool:
this is serious brendan fair play, nothin wil stop u in this car, not even walls....this car reminds ya of D. mcnamara s car 1. nothin in it
2. crazy set up
3. crazy power
4. SERIOUS PILOT :)
fair play to john.....unreal fab!!!!!has to contend with any of the best worldwide!!!!!!
keep up the serious wrk....defo cant wait c this beast in action
this is serious brendan fair play, 1. nothin in it
2. crazy set up
3. crazy power
4. SERIOUS PILOT :)
fair play to john
keep up the serious wrk....defo cant wait c this beast in action
not sure about the last one naill haaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
sorry couldnt let it go ha :D
B&G Extreme Drifting
20-04-11, 23:34
not sure about the last one naill haaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
sorry couldnt let it go ha :D
haha sure ya have to have the craic......
ya have to hand it to this 1 though, savage job!!
this is serious brendan fair play, nothin wil stop u in this car, not even walls....this car reminds ya of D. mcnamara s car 1. nothin in it
2. crazy set up
3. crazy power
4. SERIOUS PILOT :)
fair play to john.....unreal fab!!!!!has to contend with any of the best worldwide!!!!!!
keep up the serious wrk....defo cant wait c this beast in action
Cheers niall,,,,,,
Ok, got another very important bit of the fab work done over the weekend, again John showed his super-duper fabrication skills when I gave him an S2000 subframe and a skyline GTR subframe and away he went cutting,,,, this was also at home in our own garage so we had no car to check it on even,, but John as usual had it all in his head and magically produced this,,,,,,,,,,,
A GTR S2000 subframe,,
http://i1114.photobucket.com/albums/k540/Stonie3/e973c659.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/8d034572.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/f62ccd1f.jpg
It also ended up lighter that the original S2K jobby,
I'm delighted to have this done and will be hopefully fitting the engine and gearbox this week to get the mounts all fabbed up,,,,,
calicagesracing
26-04-11, 14:06
Now that's a tasty bit of work!! The man was thinking:cool:
Jay Rockett
26-04-11, 21:37
Faaaaaaaack!!! Credit to John, he's a gifted man! I need to see this in the flesh SOON!
GTRS2000 subframe fitted,,,
http://i1114.photobucket.com/albums/k540/Stonie3/704a0394.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/9bb502f0.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/192b7ca9.jpg
And Robbie is ordering these for me in the morning, going for the top of the range ER series BC coilovers because I intend doing a little time attack and some hill climbs with the car so I need some good dampers!!
http://i1114.photobucket.com/albums/k540/Stonie3/de828122.jpg
Comin along well lad! Cant wait to see where the RB lands :cool:
love this build. will be following this thread closely, keep up da great work!!
pole drift
25-05-11, 16:57
update needed??
update needed??
Time to work on it needed dude!! We are flat out in work at the min so that is more important at the min,, I did buy a manifold and big wastegate and am to pick up the rb26 this week,, I brought home the shell to our own garage last nite so will be getting stuck back in very soon,,,
martydumpvalve
25-05-11, 18:17
this is epic man!!!! i love this always wanted to do an s2000 build but didn have the funds, that mk2 looks sweet aswell lol, best o luck
can not wait to see this on the track..
http://i1114.photobucket.com/albums/k540/Stonie3/0eb8d9f6.jpg
I got this 2 weeks ago, had plans to get it mounted in the car over the next two weeks but due to ending up with a broken foot after the weekend, this is going to be slowed down which is shit but will be back at it asap,,,,
Shit man, how'd you break the foot?
Stress fracture from pressing the clutch in the drift car all weekend,,,, wouldn think that would do it would ya,,??
Oh shit! Ha. Something new learnt today, laggy turbos break your feet, clutch kick ahoy! Hope it fixes soon!
Wasn't even kicking it, was afraid of breaking the box,,,,, was sittin on the start line and round the paddock for 3 days and the race boots I have are fooked need ta get better ones with better souls,,,, some load of balls!!
Stress fracture from pressing the clutch in the drift car all weekend,,,, wouldn think that would do it would ya,,??
thats insane!! hope it all heals soon and ya get back on track with the build!
do you want a hug and some cuddles to make you feel better xoxox
An ole pint of milk or two, and a cheese sandwich or seventeen wouldn't go amiss. :D
whiskeyjack88
18-06-11, 18:21
just read this thread from start to finish lad.
she is going to be mental with that rb26 engine in her....:cool:
that cage is unreal aswel, alot of work went into that i say.
keep up the good work man
I mocked up the wheels on the front of the car tonight,, looks cool,,
http://i1114.photobucket.com/albums/k540/Stonie3/e4a7e756.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/dd5d9ef8.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/2aac06ad.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/c2c5ecfb.jpg
joey banana s14
15-08-11, 22:19
i just came a little................
Robbie Daly Ps13
15-08-11, 22:23
Jesus ur getting more hellaflush in your auld age Brendan.... Looks cool lad....
Hella flush yo yo stance mo fo!!:cool:
They actually look really good on it, can't wait to get the rear quarters back on to see how it looks with the 4 wheels on it,,
peterhouze
15-08-11, 22:46
really dont know what to say
4got how awsome this build was :)
oh god oh god oh god is al i can say..
Jay Rockett
16-08-11, 22:35
http://i1114.photobucket.com/albums/k540/Stonie3/c2c5ecfb.jpg
Yes! I do love XD9's.. Hurry up and do more to the car, i wana see moooooooooore!!!
obriener2054
21-08-11, 22:40
are you selling off some OEM bits from the car?
Livewire 78
21-08-11, 23:07
this is tasty!! shit one about ur foot though! ruined my nights reading lol thought she'd be done when i got to page 23 lol
this is tasty!! shit one about ur foot though! ruined my nights reading lol thought she'd be done when i got to page 23 lol
Just found this thread tonight and read from 1-24. My thoughts on page 2 we're epic, can't wait for the 20's. Fuck you and your weak feet Mr stone :)
The cage is nothing short of greatness. The rear looks to be a complicated mix of cuts and welds and looks like a whole lot of thought went into it. The side bars are awesome.
Great thread for learners (like me) to pic up a few hows and whys. I look forward to reading more in time.
Best of luck with the rest of your build.
Keith.
are you selling off some OEM bits from the car?
What bits ya lookin for dude,,?
Just found this thread tonight and read from 1-24. My thoughts on page 2 we're epic, can't wait for the 20's. Fuck you and your weak feet Mr stone :)
The cage is nothing short of greatness. The rear looks to be a complicated mix of cuts and welds and looks like a whole lot of thought went into it. The side bars are awesome.
Great thread for learners (like me) to pic up a few hows and whys. I look forward to reading more in time.
Best of luck with the rest of your build.
Keith.
Cheers dude,, there is a alot of work still to go but it's shaping up a bit lately,, got the rear quarters back yesterday so want ta get the rear of the car back together this week,, it's onto spending alot of money then on the engine, box and management so may start saving,,, thanks for the comments tho:cool:
Johnnyghia
22-08-11, 07:29
Jasus Brendan I will be late for work now. Amazing tread. Savage concept and so well executed.
How the foot heals soon.
Cheers John
obriener2054
22-08-11, 09:20
What bits ya lookin for dude,,?
good condition roof rubbers and the panel under the passenger dash.... clips out.....
Jasus Brendan I will be late for work now. Amazing tread. Savage concept and so well executed.
How the foot heals soon.
Cheers John
Cheers dude, ah the foot is A1 again just need ta win the lotto now,,
good condition roof rubbers and the panel under the passenger dash.... clips out.....
Il have a look for ya ted
obriener2054
30-08-11, 08:03
Il have a look for ya ted
cheers dude;)
Right so, I got John to do a bit on this for me this week because I can't get near it lately just can't get the time,, so he finished off putting the sills back on, I have another shell that I got rear quarter panels and back panel from and he mocked the whole lot up and has it all tacked in place, he will have it all welded up and rear panel strengthened with tubes connected to the cage,,,
So it's starting to look like a car again,,:cool:
http://i1114.photobucket.com/albums/k540/Stonie3/3ec637c5.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/8efa0a44.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/6174f3ad.jpg
It's scary to think the only real weight left to go into this is the doors, and running gear, this thing is going to be light and with 600hp it will be fun;)
Iv also got going on the engine this week, so won't be long until I get that built so happy days,,,,,
Glad to see summit happening with this again lad :)
taught you had given up on it.
Marcin1991
03-12-11, 14:27
aaaaaare u mad:D???:Dnice buld man hehe:di burnt my pizza reading this!
Here's a few with the rear reinforced
http://i286.photobucket.com/albums/ll109/jstoneracing/231ba758.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/3378004a.jpg
http://i286.photobucket.com/albums/ll109/jstoneracing/86954f10.jpg
Robbie Daly Ps13
03-12-11, 17:22
It's scary to think the only real weight left to go into this is the doors, and running gear, this thing is going to be light and with 600hp it will be fun;)
Iv also got going on the engine this week, so won't be long until I get that built so happy days,,,,,
You forgot the driver..... :)
B&G Extreme Drifting
03-12-11, 18:18
savage build stonie, chronic!!!
James Doyle
03-12-11, 23:33
be the rath of god is all i can say
Serious job now........whens it gonna be finished?
Serious job now........whens it gonna be finished?
Whenever :wink:
Collected my new FRP hard top today, and must say it's the job,,
http://i1114.photobucket.com/albums/k540/Stonie3/7a486ee9.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/ee997253.jpg
http://i1114.photobucket.com/albums/k540/Stonie3/296fc138.jpg
A little trimming around the cage and it will fit perfect, going to get the doors done in FRP next and the boot door,,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.