RX7 project........sluggish!!!!!!

[skinnynphats200]

So I have the car about 4-5 months.......after a long hard battle with myself, I decided to keep it and fuck some money at it!!!!!! (and hopefully turn it into a decent drift car). After Portlaoise on Sunday I figured out that I needed more lock, a new map, and proper suspension setup to start off with!

I will be looking at sorting performance & handling first of all and when I have that sorted I will be get to the bodywork and some big dish hopefully :D...I have a couple of ideas in mind for the bodywork, ive taken a shine to one of the veilside kits! I will post pics up of a few......

Spec as it stands;
Apexi Power Fc & Commander
Omoni Water, Oil Temp, Oil Pressure & Boost Gauge
Yellow Stuff Pads all round(new)
Compbrake Hydraulic Handbrake
Bride Seat
Nardi Wheel
Stainless Exhaust(unknown)
Rays wheels(not in the best nik)
Mazdaspeed bumper, skirts & spats & light cover
Adjustable Camber arm knuckles & Toe arms
HKS Hiper D Coilovers
Arc Intercooler hard pipe kit

The plans for it are

Some extra lock hubs courtesy of Justjap!
All new adjustable arms for rear
Camber adjustable top mounts
Get a new map and get as much power as I can out of it.....I need advise of what supporting mods I need to get the best setup possible...fuel pump, injectors etc....??????
Turbo back exhaust
Polybush it....clean up and paint subframes
Maybe cage....unsure of a bolt in or a weld in yet???
Then I want to stick a kit on and respray it....im thinking ninja green :D:D:D:D

Updates will be slow as I only have the evenings during the week to work on this......will be back from Yowdy with extra lock hubs and Hydro in the next week or two hopefully when I can start getting working on it

Thats about it for now, the plans will probably change along the way aswell....please comment and post your ideas and suggestions and opinions...I want to make this one different....... Any heads are better than mine :D

Edit; oh yeah..... I will be needing to call on people for help....and probably a lot of it! This is only my second project build and the first one was a B18 eg so it doesnt really count! Anybody that would like to volunteer feel free!!!!!!!!!!!! ;-)

Heres the pics as she stands now

http://i962.photobucket.com/albums/ae106/Daddeekyle/DSCF0003.jpghttp://i962.photobucket.com/albums/ae106/Daddeekyle/DSCF0004.jpghttp://i962.photobucket.com/albums/ae106/Daddeekyle/DSCF0014.jpghttp://i962.photobucket.com/albums/ae106/Daddeekyle/DSCF0015.jpghttp://i962.photobucket.com/albums/ae106/Daddeekyle/DSCF0017.jpg

[S14a johno]

gona be SAVAGE ............ keep us updated :D:D

[Aidan Hogan]

gonna be a cool build anyway good luck with it :cool:

[hunty_sideways]

Look forward to see in this but please not ninja green ;)

[sbradley]

best of luck wit it...be a good project

[skinnynphats200]

Look forward to see in this but please not ninja green ;)

Why not ninja green? its an awseome colour......

http://lh3.ggpht.com/_RxvztZWqql4/TBuxEe7yw3I/AAAAAAAAAC0/LCChi0DkXOU/fd-rear.jpghttp://lh3.ggpht.com/_RxvztZWqql4/TButmBMnzJI/AAAAAAAAAB8/sfZSHOU7qQM/fd-front.jpghttp://image.nengun.com/gallery/primary/Tokyo%20Auto%20Salon%202010/Rotaries/RE%20Amemiya%20-%20Monster%20No%209-20102601-0.jpghttp://www.rx7heaven.co.nz/images/green-rx.jpg

[tweek]

Loose the wing i dont like it at all doesnt really suit the car.what profile is on the tyres?

[Adam O C..]

Candy green if any lad like the two in the pics..

[skinnynphats200]

Loose the wing i dont like it at all doesnt really suit the car.what profile is on the tyres?

there 225/45s iirc? Yeah was plannin on getting rid and getting a proper wide BGW??? :D

[skinnynphats200]

Candy green if any lad like the two in the pics..

Im still undecided man, I want something different though thats all I know

[tomsheen]

i think it already looks one of a kind.. but keep us posted
looking forward to see how it comes along.. best of luck with it:)

[skinnynphats200]

Will do.....just waiting to get it back from Yowdy! Cant wait :D - first time fabricating extra lock hubs for an rx7 i think so prob a bit more work than normal

[skinnynphats200]

Small update of a little work I done, full service, oils, filter, coolant, power steering fluid, spark plugs, bushes, drop links, front mount, alloy rad etc...

Pics are from phone so are pretty shit...

So got in here bout 2 weeks ago.....

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_Kylesphonepics146.jpg?t=1304333139

Then I picked these up...front mount from Mano off here brand new in the box :D Sound dude! and the rad from Jap Performance

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_190.jpg?t=1304333139http://i962.photobucket.com/albums/ae106/Daddeekyle/th_191.jpg?t=1304333139http://i962.photobucket.com/albums/ae106/Daddeekyle/th_189.jpg?t=1304333139

Some Parts from Mazda....

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_198.jpg?t=1304333524http://i962.photobucket.com/albums/ae106/Daddeekyle/th_199.jpg?t=1304333524

Got this welded on to the rad for the fill pipe from coolant bottle

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_197.jpg?t=1304333524

Front end and old bits out... incl. the last of the air con

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_181.jpg?t=1299448647http://i962.photobucket.com/albums/ae106/Daddeekyle/th_188.jpg?t=1299448647http://i962.photobucket.com/albums/ae106/Daddeekyle/th_186.jpg?t=1299448647

Relocated the battery to the boot aswell

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_196.jpg?t=1299448647

New bits fitted and back together

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_193.jpg?t=1299448647http://i962.photobucket.com/albums/ae106/Daddeekyle/th_210.jpg?t=1299448647http://i962.photobucket.com/albums/ae106/Daddeekyle/th_211.jpg?t=1299448647

The wand from Just Jap

http://i962.photobucket.com/albums/ae106/Daddeekyle/th_205.jpg?t=1299448647

Got extra lock hubs made up and fitted aswellbut I still need to get new modified lower arms fabricated and put in rack spacers because the calipers are hitting of the lower arm and acting as a bump stop so full lock cant be obtained yet! Will post up the pics when I get that sorted

Next to go on is Walbro pump, de cat, downpipe, going TDP for map end of the month, then suspension setup and start sliding!

[skinnynphats200]

Been a while and haven't done much on this due to moneys being low and getting broken into.

Fitted a new throttle body.
Collecting and fitting new downpipe and decat tomorrow from Jap Performance.
Compression tested the other night as there no point in mapping a fooked rotary, it turns out the 13b is in good condition so I booked it in to be mapped on the 19th at TDP.
A few little niggly bits to sort out after that but hopefully should be out for mondello next month with some good power

[Greg]

Looking forward to seeing the results of the mapping and seeing how it goes around Mondello. :)

[skinnynphats200]

Yeah I dont really know what power to expect from it or what it should achieve???
But more than anything I want it to run smooth and be reliable

[B&G Extreme Drifting]

best of luck with it man...im behind ya on the kawazaki colour, I'm die hard ninja man myself....them pics are class of that RX7 :)

[si_berry]

Only spotted this thread now, best of look with her Kyle. The 200 is far to much hassle! When do you reckon she'll be ready for the track??

[batman026]

keed up the good work man and the green would look sweet

[tomsheen]

coming together now man.. get a vid of it on the dyno if ya can..
theres nothing like a screaming rotary!:cool:

[skinnynphats200]

Only spotted this thread now, best of look with her Kyle. The 200 is far to much hassle! When do you reckon she'll be ready for the track??

Cheers Si - well mapping is on the 19th so im hoping straight away after that!
How ya getting on with yer own? Oh yeah, noticed there last week ya left yer funnel in the garage. Give us a shout there during the week


keed up the good work man and the green would look sweet

Thanks. Thats a bit in the distant future though, the main thing is learn how to control it properly first.......;-)


coming together now man.. get a vid of it on the dyno if ya can..
theres nothing like a screaming rotary!:cool:

I'd love too but I cant take of work to stay for the mapping unfortunately :-(

[skinnynphats200]

A little progress on this. I picked up the downpipe and midpipe the other night and got started fitting them....ran into a couple of problems though!
I'll let the pics talk.....although I still cant figure out how t get them the right size, keep ending up either too big or too small

So this is what came out
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics007.jpg?t=1305137245

These are the new bits. Whoever had the downpipe wrapped it in heat repellant tape for some reason rather than heat wrap when I got it and the threads on the boss for the o2 sensor were shot aswell so I spent a while getting the tape off and cleaning up the pipe and the threads
From this
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics005.jpg?t=1305137245
To this
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics013.jpg?t=1305137245
And this
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics008.jpg?t=1305137245
To this
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics009.jpg?t=1305137245

While I was at it I went searching for any worn/cracked/disconnected piping there might be,
I found 2 of these that were fairly shabby and one was disconnected
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics011.jpg?t=1305137245
So I replaced them with these
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics012.jpg?t=1305137245
When I had it running again after I finished it made the difference, the car stopped hunting and is a little smoother on idle

So after that it came around to fitting the downpipe and I ran into problems. I had to return it in the end and run the stock downpipe as it just wouldnt fit, you can see in the pics the size of the stock d/p compared to the a/m one, and the space between the turbo flange and the column. The diameter of the downpipe is extremely narrow to allow for the steering column to fit, compared to the width from the flange to the outer most point on the a/m pipe.
Even still though the difference is noticable with the decat, the accelator is much more snappy than it was and it comes on boost much quicker, fucking nightmare though after taking it all apart.
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics014.jpg?t=1305137245
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics013.jpg?t=1305137245
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics010.jpg?t=1305137245
http://i962.photobucket.com/albums/ae106/Daddeekyle/ExhaustFittingrx7pics006.jpg?t=1305137245

Then just gave the brakes/Hydro a good bleed out tonight, going to buy some heavy duty clips for the ic piping tomorrow. Then just a few niggly bits too sort and then should be ready for mapping

[diggerdolan]

An aould resize on the pics would nt go astray!

[skinnynphats200]

An aould resize on the pics would nt go astray!

I cant figure put how to do it, im taking them from photobucket and cant get them the right size

[copeyhagen]

you have to resize them before you upload them

i use a program called 'irfanview'
its free and easy
open the pic, click edit<resize< and just make it like 33% of the original

[skinnynphats200]

you have to resize them before you upload them

i use a program called 'irfanview'
its free and easy
open the pic, click edit<resize< and just make it like 33% of the original

Cheers man, i'll give this a shot later and see how it goes. Thanks

[Prodrifter86]

U can re-size on Photobucket its handy out! :D

[skinnynphats200]

U can re-size on Photobucket its handy out! :D

Cool what size should I put them too?

[skinnynphats200]

I took off the little gay wing and I think the car looks much better. I didn't think it suited the car at all

http://i962.photobucket.com/albums/ae106/Daddeekyle/randomrx7picsvid012.jpg?t=1305472926

I also made a little mod to raise the bonnet to improve the air flow for cooling and couldn't resist taking a few pics after a clean! (hasn't been washed in the first 2 pics)

http://i962.photobucket.com/albums/ae106/Daddeekyle/randomrx7picsvid009.jpg?t=1305472926

http://i962.photobucket.com/albums/ae106/Daddeekyle/randomrx7picsvid007.jpg?t=1305472926

http://i962.photobucket.com/albums/ae106/Daddeekyle/randomrx7picsvid010.jpg?t=1305472926

http://i962.photobucket.com/albums/ae106/Daddeekyle/randomrx7picsvid011.jpg?t=1305472926

So its pretty much ready for mapping now bar a little slop in the steering which should be sorted before Thurs. Then on sat im hoping to get the suspension set-up properly (if the lads have time that is).....and then mondello Sunday provided I don't run into any complications between now and then!

Spotted this down in arklow, sorry about the shit pic. Have a fetish for e30's and this one looked really clean from the outside

http://i962.photobucket.com/albums/ae106/Daddeekyle/randomrx7picsvid001.jpg?t=1305474024

[Greg]

In the Apple garage? The young lad working in there owns it.

[skinnynphats200]

In the Apple garage? The young lad working in there owns it.

Yeah thats the one! I didnt get out and have a look or anything but looked striking in the sun, just after a clean and polish i'd say!

[skinnynphats200]

Had no internet for a while. Only got it back working. So I got the car mapped and it made 355bhp and 317lb/ft. I was pretty happy with this when I heard but...........the water pump/engine was whining/knocking a bit, haven't heard it since though its been driving spot on. And on the bright side, the seals are all good!!! :cool:
So anyway I think I am going to sell up/swap, or break it....
I'm very dissapointed but logic must prevail, I need €€€......:mad::(:(:(:(

[PeterT]

Ah for fuck sake what a pain in the sack :( stick another engine in! Or else strip it for bits and buy an sbody for cheapness!

[Stevie e39 drift]

sr it man break and sell the good bits of engine ;)

[skinnynphats200]

No i'm gonna just sell it in 1 piece or would rather a swap for something track ready!! Put so much time and effort into it now so i dont want a project until the winter! I just want to go drifting hassle free. So if anybody wants to swap me something track ready im all ears!!!;)